Surge Suppressors/Protectors
-
Panorama Antennas Coaxial Surge Arrester - SMA - Coaxial
The SA-SP-SJ is a single strike gas discharge surge arrester which offers a light duty surge protection solution. It is fitted with SMA connectors allowing it to be mounted in line between the antenna and cables or coaxial cable and radio/router device.
The surge arrester can operate up to 5.8GHz with low return and insertion loss. It has a bulkhead fitting which can be used to mount and ground the device to conductive panels of up to a max 4mm (0.16") thickness - alternatively a heavy duty grounding tag can be fitted.
Learn More -
Panorama lightning arrester - SMA - SMA - 25 VA - Antenna, Coaxial, Router
This multi strike surge arrester offers a flexible light duty surge protection solution using SMA connectors allowing it to be mounted in line between antennas and feeder cables or coaxial cables and radio / router devices.
The surge arrester can operate between 0-6GHz with low return and insertion loss. The surge arrester is fitted with a bulkhead feature which can be used to mount and earth the device to conductive earth bars / panels of max 6.5mm (0.25") thickness, alternatively this feature can accept a heavy duty earth tag.
Learn More$143.99 -
Panorama Antennas antenna coupler - N-Type - N-Type - 80 VA - Antenna, Coaxial, Router
This surge arrester offers a flexible light duty surge protection solution using N Bulkhead Jack connectors allowing it to be mounted in line between antennas and feeder cables or coaxial cables and radio / router devices.
The surge arrester can operate between 0-6GHz with low return and insertion loss. The surge arrester is fitted with a bulkhead feature which can be used to mount and earth the device to conductive earth bars / panels of max 6.5mm (0.25") thickness, alternatively this feature can accept a heavy duty earth tag.
Learn More$149.25 -
JEFA Tech SP3-90 Surge Protector Module - SMA - SMA - Coaxial, Antenna
Surge Protector, SMA Male to SMA Female, 6KA Discharge, .4dB IL, DC to 3 GHz Operation
The Surge Protectors are an integral part of any antenna installation to protect sensitive equipment from surges caused by lightning. The ultra fast gas discharge tube design gives quick response to power surges and dumps the excess power safely to ground. A ground lug terminal is supplied to provide for superior grounding. The units have the ability to withstand multiple lightning strikes. The SP3-90 passes DC voltage so it is suitable for those systems which pass DC power through the coax such as remote amplifiers.
Learn More -
ComNet Single Port Ethernet Surge Protector - Ethernet
The CopperLine CLESP provides surge protection for Ethernet connections operating under potentials of high surge resulting from conditions such as lighting strikes or power fluctuations. Protection is provided concurrent to the IEC EN55024 Immunity characteristics for continuous and transient, conducted and radiated disturbances, including electrostatic discharges (ESD). The CLESP requires the shield of the RJ-45 connectors to be connected to the chassis ground.
Learn More -
Furman SS-6B-PRO 6-Outlet Surge Suppressor/Protector - 6 x AC Power - 540 J - 120 V AC Input - 15 ft
Furman SS-6B-PRO
The SS-6B-PRO adds Extreme Voltage Shutdown to the venerable SS-6B for exceptional performance and protection.
The SS-6B-PRO is a 6-outlet power block with standard level surge suppression protection, EMI/RFI filtration, Extreme Voltage Shudown (EVS), heavy duty steel construction, and a 15ft. Power cord.
The EVS provides over/under voltage protection and will automatically turn back on once the incoming power has stabilized. Another great value of the EVS circuit is that not only does it protect the connected equipment, the EVS also protects the SS-6B-PRO making a sacrificial situation highly unlikely.
Learn More
