Relays

Relay Card Works with Eaton UPS Systems

This INDRELAY-MS relay card enables network monitoring of UPS system status through a connected computer with a dedicated adapter that provides the essential dry-contact interface between an Eaton UPS and any relay-connected computer, as well as a variety of industrial applications. Network monitoring helps protect the computer by initiating automatic shutdowns. Supported Eaton UPS systems include the 93PM and 93E series.

Communicates UPS Information via Dry Contacts

INDRELAY-MS offers five isolated dry-contact outputs and one isolated dry-contact input. Relays K1 through K5 are identical in function. In some UPS systems, you can assign each output contact function yourself. The card also features a cable exit opening for conduit up to 12.7 millimeters (0.5 inches).

The Model PSR-206 is a zone page, powered relay-pak with an internal power supply. The unit is completely wired and ready for mounting. The power supply is capable of delivering 500 mA at 24 VDC. A fuse is used for extra protection. The output of the power supply is terminated at the terminal strip as well as internally to the relay coils. This allows the use of excess power supply capacity for external relays.
Six 24 VDC, DPDT relays are pre-mounted and wired to the power supply. The contacts are of silver, gold plated and the contact rating is 3 amps. The coil current is a nominal 35mA. The relays are wired and terminated. The terminals are easily identified by a silkscreened diagram. Any relay may be easily converted to an 'all page' relay by connecting the off bus to the selected relay-switch output. Note: Allows for 5 zones, plus "All Call" , or 6 zones without "All Call".
Model PSR-206. Is a completely enclosed in a compact 18-gauge CRS chassis finished in black epoxy. It features a 6 ft. power cord. It is designed to be used with AtlasIED Model MPC Series modular paging communications center.

The Vertiv Liebert IntelliSlot Relay Card (IS-RELAY) provides contact closure for remote monitoring of alarm conditions in UPS systems with an IntelliSlot communication port. The card delivers proactive data center monitoring on 6 alarm points (On Battery, On Bypass, Low Battery, Summary Alarm, UPS Fault and On UPS signals). This advanced power-management device is designed to function in units with a Vertiv Liebert IntelliSlot port. These include Vertiv Liebert NX UPS, Vertiv Liebert Nfinity UPS and Vertiv Liebert GXT3 UPS. The relay card is easy to integrate with other relay contact monitoring systems. It is rated for 24VAC/VDC at 1A. It communicates with the Vertiv Liebert MultiLink automated shutdown software for UPS monitoring, full event management and automated shutdown protection. The card can be installed fast and easy by your onsite personnel. It is hot-swappable, so you do not have to shut down the system when installing.

More from the Manufacturer

The PS-REL AC Relay provides an alternate way of closing switch contacts. Instead of being operated manually like the RS-1, it is a relay that detects the presence of AC power and, in response, closes relay contacts that are wired to a terminal strip. It may be used with any of the Furman products mentioned in connection with the RS-1.

A PS-REL is useful in determining when a certain outlet has come on after a sequenced delay, to extend that outlet's capacity. It may also be used to extend the capacity of the switched outlet found on many home theater receiver/amps. In this way, a wireless remote can turn on the receiver, which in turn powers its switched outlet, which triggers the PS-REL, which then activates a Furman PS-8R or PS-PRO Power Sequencer, MiniPort, or PowerPort system capable of switching many large power amps or other power-hungry equipment in multiple locations.