Power Injectors/Splitters
-
VisionTek PoE Injector - 12 Port Gigabit - Mode A/B - Rack Mount With a 48 Volt 120 Watt Power Supply - 48 V DC Input - 48 V Output - 12 Gigabit PoE Input Port(s) - 12 Gigabit Ethernet Output Port(s) - 120 W - 1U
GPOE 12AB 48 Volt 120 Watt
12 Port Gigabit Injector & Rack Mount
Simplify installations with a multi-port midspan injector. Power up to twelve IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. A Passive PoE injector always delivers the same voltage as its power source. This kit includes a 48 volt, 120 watt power supply to use with IEEE 802.3af PoE devices.
Save big on network upgrades and device installations. Power over Ethernet delivers power 328 feet from the PoE Injector, eliminating the expense and hassle of installing AC power near your powered device.
Compatible Devices
- IP phones like Polycom, Cisco, Yealink
- WiFi Access points
- IP Cameras
- 802.3af devices
- NOTE: All devices receive the same voltage (48 volts) and share power up to 120 watts. Check your device specifications for power needs
- Power up to 12 PoE devices in one unit - extend power up to 328 feet
- Passive "Always On" power will continuously deliver power to your device
- Includes a UL Rated 48 volt, 120 watt power supply
- Compatible with Passive 802.3af PoE devices
- Mode A/B power input options allows for versatile PoE applications
- Input 48 Volts
- .65A Port Limit - up to 31 watts per port with total budget of 120 watts available for all ports
- 10/100/1000 Mbps data operation
- Quality shielded RJ45 ports
- Bright LED status indicators
- 1U Rack Mount
$207.88 -
WatchGuard PoE+ Injector
WatchGuard PoE+ Injector Learn More -
WatchGuard PoE+ Injector - 120 V AC, 230 V AC Input - 1 x 2.5 Gigabit Ethernet Input Port(s) - 1 x 2.5 Gigabit PoE+ Output Port(s) - 30 W
WatchGuard PoE+ Injector - 120 V AC, 230 V AC Input - 1 x 2.5 Gigabit Ethernet Input Port(s) - 1 x 2.5 Gigabit PoE+ Output Port(s) - 30 W Learn More -
Ubiquiti POE-24-24W PoE Injector - 120 V AC, 230 V AC Input - 24 V DC, 1 A Output - 24 W
Device Protection
PoE Adapters are highly reliable, and when used with Ubiquiti TOUGHCable™, they provide earth grounding and surge protection to help protect against electrostatic discharge (ESD) events.
Convenient Wall-Mounting
The 24V, 0.5A models, POE-24-12W and POE-24-12W-G, are wall-mountable using the optional wall-mount brackets.
Seamless airGateway™ Compatibility
The 15V, 0.8A and 24V, 0.5A models, POE-15-12W, POE-24-12W and POE-24-12W-G, work with the airGateway™ to bridge airMAX® connections to Wi-Fi at customer locations.
Learn More -
Ubiquiti PoE Adapter - 120 V AC, 230 V AC Input - 24 V DC, 1 A Output - 1 x Gigabit Ethernet Input Port(s) - 1 x PoE Output Port(s) - 24 W
Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including:
- airFiber®
- airMAX®
- EdgeMAX®
- mFi®
- UniFi® AP
- UniFi Protect / airVision®
- UniFi LED
- U Fiber
Ubiquiti PoE Adapter Compatibility with the airGateway®
Specific PoE Adapter models are designed to work with the airGateway. The airGateway is a compact CPE (consumer premises equipment) gateway with built-in Wi-Fi used to connect the subscriber's local network to the WISP network.
The airGateway is available in three models:
- airGateway Standard model with an internal antenna
- airGateway Pro Dual-Band Wi-Fi model with an internal antenna
- airGateway-LR Long-range Wi-Fi model with an external antenna for extended range
Protection
Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices:
- Surge protection
- Clamping protection
- Maximum surge discharge
- Peak pulse current
- AC cable with earth ground
Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCable TM , and TOUGHCable Connectors.
Learn More -
Ubiquiti POE-24-24W-G-WH PoE Injector - 120 V AC, 230 V AC Input - 24 V DC, 1 A Output - RJ-45 Input Port(s) - PoE Output Port(s) - 24 W - White
Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including:
- airFiber®
- airMAX®
- EdgeMAX®
- mFi®
- UniFi® AP
- UniFi Protect / airVision®
- UniFi LED
- U Fiber
Ubiquiti PoE Adapter Compatibility with the airGateway®
Specific PoE Adapter models are designed to work with the airGateway. The airGateway is a compact CPE (consumer premises equipment) gateway with built-in Wi-Fi used to connect the subscriber's local network to the WISP network.
The airGateway is available in three models:
- airGateway Standard model with an internal antenna
- airGateway Pro Dual-Band Wi-Fi model with an internal antenna
- airGateway-LR Long-range Wi-Fi model with an external antenna for extended range
Protection
Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices:
- Surge protection
- Clamping protection
- Maximum surge discharge
- Peak pulse current
- AC cable with earth ground
Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCable™, and TOUGHCable Connectors.
Potential for ESD
Areas vulnerable to ESD events in a network without a Ubiquiti PoE Adapter.
Protection Against ESD
? Ubiquiti PoE Adapters and TOUGHCable protect against ESD events in a network.
Learn More
