Power Injectors/Splitters
-
Omnitron Systems RuggedNet Industrial Unmanaged 60W Gigabit PoE Extender with Booster Technology - 1 RJ-45 PoE/PD + 1 RJ-45 PoE/PSE, Lifetime Warranty
RuggedNet Industrial GXPoE+/Si and GXHPoE/Si are unmanaged gigabit PoE Extenders that enable the delivery of Ethernet data and Power over Ethernet (PoE) beyond the standard 100 meter limit of twisted pair copper cabling.
Learn More
RuggedNet Industrial PoE Extenders provide cost-effective distance extension and connectivity to remote PoE devices where external power is not available or hard to provision, or when replacing copper with fiber becomes cost prohibitive.
RuggedNet Industrial PoE Extenders are 10/100/1000BASE-T Ethernet extenders that function as both Powered Devices (PD) and Power Sourcing Equipment (PSE), and require no external AC power. They feature one PoE/PD port and one or two PoE/PSE ports, and can be powered by an IEEE 802.3at or High-Power PoE 60W power source, such as a RuggedNet GHPoE/Si or GHPoE/Mi High-Power 60W PSE switch.
Utilizing data regeneration and voltage level boosting capabilities, RuggedNet Industrial PoE Extenders can be daisy-chained to break through the Ethernet copper distance barrier and deliver 10/100/1000 data and power to multiple PoE powered devices.
Due to cable resistance, voltage drop across the cabling could lower the voltage below the minimum standard requirement of the attached PD. RuggedNet PoE Extenders have smart voltage-boosting technology to maintain the required standard compliant PoE voltage levels between hops.
The PoE Extenders automatically negotiate and deliver the power level required by a Powered Device (PD) partner. When a non-PoE device, such as a laptop, is connected to the PoE Extenders for data only applications, no power is applied.
RuggedNet Industrial PoE Extenders are plug-and-play devices that support auto-negotiation of data rates and duplex modes for simple in-line installation to instantly extend industrial network distances. The PoE Extenders are fully operational once a PSE source is applied to the PoE/PD port, displaying power and operational status without a PD attached. This facilitates the installation and troubleshooting by ensuring each link is operational.
The RuggedNet Industrial PoE Extenders can be wall mounted with an optional wall mount bracket or DIN$607.75 -
EnGenius 2.5 Gigabit 802.3at PoE Adapter - 120 V AC, 230 V AC Input - 1 x Gigabit Ethernet Input Port(s) - 1 x Gigabit PoE Output Port(s) - 30 W
The EnGenius EPA5006HAT 2.5 Gigabit standard Power-over-Ethernet adapter supports high-speed data and up to 30 watts of power. Compact port design provides easy installation, and built-in power surge protection preserves valuable equipment.
- 2.5 Gigabit Ethernet in & out ports allow connection of high-speed devices
- Delivers both data and power to PoE-compatible devices
- Optimal port design for easy mounting/positioning
- Compact design
- Extends power to unwired areas up to 328-ft./100m
- Disconnect, short-circuit & surge protection assures secure, reliable connections
- Sends up to 30W of output power for connecting APs, IP cameras, VoIP phones & more
- Mounts to walls or ceilings with included hardware
-
EnGenius PoE Converter - 24 V DC, 1 A Output - 1 x 10/100Base-TX Input Port(s) - 1 x 10/100Base-TX Output Port(s)
EPD4824 EnGenius PoE Converter is design to convert the proprietary 24V PoE to work with Standard 802.3af PoE. This enable better and easier integration during deployment.
It also serve to extend the LAN between the device. It supports conversion of PoE for models, ENH202, ENH500, ENS202, ENS202 EXT, ENS500 and ENS500 EXT.
Learn More -
Fortinet FortiAP GPI-115 Power over Ethernet Injector - 110 V AC, 220 V AC Input - 50 V DC Output - 1 x 10/100/1000Base-T Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 15.40 W
The GPI-115 single port Power over Ethernet (PoE) injector offers a fully IEEE 802.3af-compliant solution for the FortiAP wireless access point family, and other 802.3af-based devices. This mid-span power injector supplies up to 15.4 Watts of Gigabit Ethernet PoE and works with legacy network devices. The GPI-115 PoE Injector uses an intelligent auto-sensing algorithm to supply power to devices that accept 802.3af PoE connections.
Learn More -
Fortinet GPI-130 Gigbit PoE Injector - 120 V AC, 230 V AC Input - 55 V DC Output - 1 x 10/100/1000Base-T Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 30 W
The Fortinet GPI-130 Power over Ethernet (PoE) Injector offers a compact and cost-effective IEEE 802.3af compliant power solution for IP telephony, wireless access points, network cameras and other IP-based hardware installations. The unit provides pass through data rates of up to 1000Mbps (Gigabit Ethernet).
Learn More
The GPI-130 converts AC voltage to 55V DC voltage, which is then provided over an Ethernet cable.
The unit can be powered via any AC input, and provides up to 30W of power for your devices.$131.49 -
GeoVision GV-APOE0810 10-Port 10/100/1000M Unmanaged PoE Switch with 8-Port PoE - 120 V AC, 230 V AC Input - 2 x 10/100/1000Base-T Input Port(s) - 8 x 10/100/1000Base-T Output Port(s) - 120 W
GV-APOE0810 is a 10-port 10/100/1000 Mbps unmanaged PoE Switch with 8 PSE/PoE ports and 2 uplink ports. The switch supports IEEE 802.3at Power over Ethernet standard, up to 32 W per port, for up to 8 GV-IP devices and a maximum power consumption of 125 W. In addition to not requiring special network cables for connecting your powered devices (PD), such as IP cameras, it also allows power supply over cables of up to 250 m (820 ft) in length, at 10 Mbps. The switch is designed for small or medium network environment to strengthen its network connection and efficiency. It also gives you the option of VLAN mode to isolate each of the PoE ports for an enhanced forwarding rate of time.
Learn More$161.81
