Power Injectors/Splitters
-
Altronix Outdoor Single Port Hi-PoE Injector - 120 V AC, 230 V AC Input - 56 V DC Output - 1 x 10/100/1000Base-T Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 60 W
NetWay1DWP Outdoor Single Port Midspan Injector provides High PoE (60W) power and passes data for PoE compliant cameras/edge devices. Cameras/edge devices may be located up to 100m (328 ft.) from the unit. NetWay1DWPM includes built-in IP management facilitates remote device reset/control and status monitoring.
Learn More$247.86 -
Altronix Single Port Hi-PoE Injector for Standard & Enhanced Power Network Infrastructure - 120 V AC, 230 V AC Input - 56 V DC Output - 1 x 10/100/1000Base-T Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 60 W
Altronix NetWay1D Single Port Midspan Injector provides Hi-PoE (60W) power and passes data for PoE compliant device. PoE device may be located up to 100m (328 ft.) from the unit.
Learn More$165.58 -
B&B Gigabit POE Splitter, (25W) 24 VDC - 24 V DC Output - 1 x 10/100/1000Base-T Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 25 W - DIN Rail/Wall Mountable
EIRP Industrial Unmanaged Power over Ethernet Switches
PoE stands for Power over Ethernet, which is just what it says. Power is transmitted over the Ethernet cable along with the data lines. Each PoE switch has a set of ports that is classified as power source equipment (PSE). These ports can be used to power IEEE 802.3af compliant powered devices (PD), eliminating the need for a separate power line to be run to each end device.
Learn More$112.79 -
Allied Telesis Gigabit PoE+ Injector - 110 V AC, 220 V AC Input - 55 V DC, 600 mA Output - 1 x 10/100/1000Base-T Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 33 W
The Allied Telesis AT-6101GP Power over Ethernet Plus Injector provides data and power through the Ethernet cable to PoE-equipped devices such as access points, IP cameras, VoIP phones and any other equipment supporting the IEEE 802.3at standard.
Learn More$108.41 -
Allied Telesis AT-7101GHTm Multi-Gigabit PoE++ (IEEE 802.3bt) Injector - 120 V AC, 230 V AC Input - 1 Input Port(s) - 1 Output Port(s) - Black
PoE++ (802.3bt) Injector
The AT-7101GHTm single-port Power over Ethernet Injector provides data and power through the Ethernet cable to PoE equipped devices, such as wireless access points, IP cameras, VoIP phones and more.
Flexible power delivery enables supporting devices with the:
- 15.4 Watts or PoE (IEEE 802.3af)
- 30 Watts of PoE+ (IEEE 802.3at)
- 60 Watts of PoE++ (IEEE802.3bt)
To enable modern networks of all speeds, the AT-7101GHTm can remotely power high-performance devices across Multi-Gigabit networks running at 1/2.5/5Gbps, as well as older networks running at 100Mbps.
The combination of Multi-Gigabit network performance, and power delivery available up to 60 Watts, make the AT-7101GHTm one of the most flexible and capable PoE injectors available.
Powered Device (PD) detection
The AT-7101GHTm injector automatically detects if the PD supports one of the PoE standards (IEEE 802.3af, 802.3at, or 802.3bt), and will then connect and power that device. If the injector detects that the connected device does not support one of the PoE standards, then it will not provide power to the device to avoid potential damage.
Main applications
Cost savings can be achieved using the AT-7101GHTm injector for remotely powering VoIP phones, IP cameras, wireless access points, and other types of PDs. There is no need for additional power cabling as the injector feeds power to the equipment through the same cable used for data.
Extend the distance from the network switch to the PD by up to 100 meters, which enables powering devices in hard-to-reach locations - as the AT-7101GHTm injector can be installed anywhere between the switch and the PD.
The AT-7101GHTm injector protects your network infrastructure investment, as Multi-Gigabit support means there is no need to replace existing legacy Cat5e/Cat6 building cables when connecting and powering PoE enabled devices.
For resilience, connecting the AT-7101GHTm injector to a UPS backed-up power supply protects the PD from any power outages.
Learn More$464.80 -
Altronix Single Port PoE Injector Midspan - 24 V AC, 24 V DC Input - 1 x Ethernet Output Port(s) - 15.40 W
This NetWay1 PoE Injector provides power for PoE compliant cameras. They are available with one port in a compact insulated case. Cameras may be located up to 100m (328 ft.) from the NetWay unit.
Learn More
