Power Injectors/Splitters
-
Ubiquiti Instant 802.3AF to USB Adaptor
Ubiquiti Instant 802.3AF to USB Adaptor Learn More -
Ubiquiti POE-15-12W Power over Ethernet Injector - 120 V AC, 230 V AC Input - 15 V DC, 800 mA Output - 1 x Ethernet Input Port(s) - 1 x Ethernet Output Port(s) - 12 W
Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including:
- airFiber®
- airMAX®
- EdgeMAX®
- mFi®
- UniFi® AP
- UniFi Protect / airVision®
- UniFi LED
- U Fiber
Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices:
- Surge protection
- Clamping protection
- Maximum surge discharge
- Peak pulse current
- AC cable with earth ground
TOUGHCable TM , and TOUGHCable Connectors. Learn More -
Ubiquiti POE-24-12W Power over Ethernet Injector - 120 V AC, 230 V AC Input - 24 V DC, 500 mA Output - 1 x Ethernet Input Port(s) - 1 x Ethernet Output Port(s) - 12 W
Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including:
- airFiber®
- airMAX®
- EdgeMAX®
- mFi®
- UniFi® AP
- UniFi Protect / airVision®
- UniFi LED
- U Fiber
Protection
Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices:- Surge protection
- Clamping protection
- Maximum surge discharge
- Peak pulse current
- AC cable with earth ground
Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter,
Learn More
TOUGHCable TM , and TOUGHCable Connectors. -
VisionTek PoE to 12V splitter - Input 802.3af 44-56V output 2.1mm DC 12V 1A 12W with 10/100/1000 Mbps Male splitter - 56 V DC Input - 12 V Output - 1 Gigabit PoE Input Port(s) - 1 Gigabit Ethernet, 1 DC Out Output Port(s) - 12 W
GAF 12v12w
Gigabit, Model A/B Inline Splitter
The GAF-12v12w splitter works with 802.3af PoE to provide 10 watts of continuous 12 volt power. Use with your existing PoE Switch or 48v PoE Injector to power 12 volt non-PoE devices such as Foscam 12 volt outdoor cameras or other devices up to 328 feet from the source.
Key Features
- Converts 44-56 volts PoE to 12 volt 12 watt output on a 2.1 mm DC barrel
- Input voltage range 44v to 56v PoE
- 2.1mm x 5.5mm DC power plug standard
- Output voltage 12 Volts 1 Amp for one camera or other device
- Data rate is 10/100/1000
- Works with your existing 802.3af PoE switch or injector (sold separately)
-
VisionTek 802.3af PoE Splitter with 5 Volt Output | Power Over Ethernet Compatible with 5v USB Devices - Tablets - Raspberry Pi and More (5 Volt 10 Watt - in-Wall Outlet) - 57 V DC Input - 1 Gigabit PoE Input Port(s) - 1 Gigabit Ethernet, 2 USB Output Por
GAF USB2
In Wall PoE Splitter
Perfect for integrating USB charging into your home or office. Easily convert a regular outlet into a USB charging and network data outlet. Utilize Power over Ethernet technology to extend power to this 5 volt wall outlet near your office desk, in your kitchen or living areas, or anywhere you need a convenient charging station. Save money by using the GAF-USB2 in-wall outlet; it can easily be integrated into your space for a fraction of the cost of installing a traditional 120 VAC outlet.
Key Features
- Simple, cost effective solution for installing a USB charging station where you need it
- In-Wall option provides a clean look and integrates into your home or office space
- Power the outlet via PoE from up to 328 feet away
- Output 5 volts, 10 watts on the USB port - Apple and Android outlets configured for fast charging
- 10/100/1000 Gigabit Data on the RJ45 outlet
- Compatible with a Mode A (pins -1,2 +3,6) IEEE 802.3af injector or switch (try GPOE-1A-48v15w-ONE or GPOE-4A-48v48w)
-
VisionTek 802.3af to 5 Volt PoE Splitter - Compatible with Lightning Apple Devices - Power and Data - 57 V DC Input - 5 V Output - 1 Fast Ethernet Input Port(s) - 1 Lightning Output Port(s) - 12 W
GAF Lighting PD Accessory
Perfect for conference rooms, kiosks, and anywhere else you need a digital display. You can now use one Ethernet cable to extend power and data to your iPad up to 328 ft away at fast data speeds! This Power Over Ethernet (PoE) adapter is designed to deliver both 5 volts 12 watts of continuous power plus wired 10/100 data to iPad.
Place your touchscreen display where you want, not where the charging adapter can reach. Normal 5 volt charging cables for tablets won't work efficiently for more than a few feet, but our 5 volt PoE splitters and PoE kits can run for hundreds of feet.
Product Applications
- Zoom Room, Gotomeeting, Webex, Skype and other Video Conferencing
- POS Stations and Kiosks
- Schedulers and Mounted tablets
Key Features
- Allows you to place iPad where you want
- Extend power and data up to 328 feet
- Converts IEEE 802.3af PoE to 5 volts 12 watts
- 10/100 data speed capability
- Wired data through the lightning connector allows for greater network security
- Optimized for fast charging and better throughput
- Plug-and-play design for easy installation
- Compatible with any IEEE 802.3af/at PoE switch or injector
- For home or business applications
- 3 Foot cable for easy connection
$112.40
