Power Injectors/Splitters

TRENDnet's TI-IG90 is a reliable IP30 rated Industrial Gigabit PoE++ Injector with hardened components rated for extreme and rugged industrial environments. Connect the TI-IG90 industrial PoE injector to a non-PoE Gigabit switch, and then run an Ethernet cable up to 100 meters (328 ft.) to network a PoE device. The TI-IG90 industrial PoE injector supplies power to a PoE, PoE+, UPoE, or PoE++ (up to 90W) device. This industrial PoE injector features redundant power inputs with overload current protection to support zero downtime applications. Both DIN-rail and wall mount hardware are included with the industrial PoE injector.

• GIGABIT PORTS: The industrial PoE injector features 1 x gigabit port and 1 x gigabit PoE++ port.
• NDAA + TAA COMPLIANT: With our NDAA and TAA compliant Injector, you can plan and install networking solutions that Government customers demand today (U.S. and Canada Only)
• MANUFACTURER PROTECTION: We stand by the quality of our products.The TI-IG90, Hardened Industrial 90W Gigabit PoE++ Injector is backed and supported with 3 years of TRENDnet Manufacturer Protection.
• 4-PAIR PoE: Supplies power to a PoE (up to 15.4W), PoE+ (up to 30W), or PoE++ (up to 90W) device.
• INSTALLATION FLEXIBILITY: A rugged IP30 rated metal enclosure with DIN-rail and wall mount brackets accommodate most installations scenarios.
• PoE DISTANCE: Provides a 4-Pair PoE network connection up to 100m (328 ft.) away from the industrial PoE injector
• DIN-RAIL MOUNT: IP30 rated metal enclosure, includes DIN-rail mount and wall mount brackets
• REDUNDANT POWER: Redundant power inputs with overload current protection (power supply sold separately, model: TI-S15052, TI-S12048)
• WIDE TEMPERATURE RANGE: A wide operating temperature range of -40° - 75° C (-40° - 167° F) allows for installations in industrial environments with extreme hot or cold conditions

More from the Manufacturer

TRENDnet's Industrial Gigabit UPoE Splitter, model TI-SG104, networks a non-PoE device by using a Gigabit Ultra PoE connection and splitting it into separate power and gigabit data sources. The industrial gigabit UPoE splitter can power to up to two devices from a single UPoE source. A convenient DIP switch adjusts output power to 12V, 16V, 24V, or 48V in order to match power requirements for non-PoE devices. The UPoE splitter's dual DC power output provides greater device compatibility.UPoE Powered

No power adapter necessary; the UPoE splitter takes a UPoE network connection, and splits power and data into separate connections to network a non-PoE device with power up to 100m (328ft.).

• GIGABIT ETHERNET : 1 x Gigabit UPoE input port, 1 x Gigabit output port
• NDAA + TAA COMPLIANT: With our NDAA and TAA compliant Industrial Gigabit UPoE Splitter, you can plan and install networking solutions that Government customers demand today (U.S. and Canada Only)
• MANUFACTURER PROTECTION: We stand by the quality of our products.The TI-SG104, Industrial Gigabit UPoE Splitter is backed and supported with 3 years of TRENDnet Manufacturer Protection.
• UPoE POWERED: No power adapter necessary; the UPoE splitter takes a UPoE network connection, and splits power and data into separate connections to network a non-PoE device with power up to 100m (328ft.).
• ADJUSTABLE VOLTAGE OUTPUT: Convenient DIP switch adjusts voltage output to 12V (2.3A), 16V (2.3A), 24V (2.3A) or 48V (1.25A) to match non-PoE device power requirements.
• WALL MOUNTABLE: The UPoE splitter's wall mountable design accommodates most installation scenarios.

• DUAL DC POWER OUTPUT TERMINAL BLOCK: The UPoE splitter includes a dual DC power output terminal block, powering for up to two devices
• For best performance pair with UPoE switches or injectors; Save on installation and equipment cost
• Full Duplex Gigabit speeds: IEEE 802.3bt compatible

More from the Manufacturer

Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including:

• airFiber®
• airMAX®
• EdgeMAX®
• mFi®
• UniFi® AP
• UniFi Protect / airVision®
• UniFi LED
• UFiber

Ubiquiti PoE Adapter Compatibility with the airGateway®

Specific PoE Adapter models are designed to work with the airGateway. The airGateway is a compact CPE (consumer premises equipment) gateway with built-in Wi-Fi used to connect the subscriber's local network to the WISP network.

The airGateway is available in three models:

• airGateway Standard model with an internal antenna
• airGateway Pro Dual-Band Wi-Fi model with an internal antenna
• airGateway-LR Long-range Wi-Fi model with an external antenna for extended range

Protection

Ubiquiti PoE Adapters provide a variety of features to help protect your PoE devices:

• Surge protection
• Clamping protection
• Maximum surge discharge
• Peak pulse current
• AC cable with earth ground

Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCable™, and TOUGHCable Connectors.