Power Injectors/Splitters
-
Veracity OUTSOURCE 90 PoE Injector - 120 V AC, 230 V AC Input - 54 V DC Output - 10/100/1000Base-T, IEC 60320 C14 Input Port(s) - 10/100/1000Base-T Output Port(s) - 90 W
OUTSOURCE 90 delivers the highest power allowed by the POE standard (802.3bt), used for external PTZ IP cameras and other very high-power applications.
- Delivers maximum remote power to IP cameras & POE devices
- 802.3bt compliant and GigE compatible
- 90W Power output
- Safety assured as POE is only enabled to compliant devices
- Integrated overload protection
- Compact, wall-mountable unit
- Sealed, fanless design for reliability
$181.09 -
Bosch Midspan, 60W, Single Port, AC In - 120 V AC, 230 V AC Input - 57 V DC Output - 1 x 10/100/1000Base-T Input Port(s) - 1 x 10/100/1000Base-T Output Port(s) - 60 W - Wall/Shelf/Bench/Desktop-mountable
60 W Midspan The 60 W midspan (NPD-6001B) enables remote High Power over Ethernet (High PoE) for various Bosch IP/HD PTZ cameras. Generating a maximum of 60 W, it complies to both the IEEE 802.3af and the IEEE 802.3at standards, while doubling the available power. Rated for indoor installation only, the midspan can be installed indoors and wired to a camera installed outdoors.
Learn More
The midspan provides surge protection, optimal for installation of outdoor powered devices. The midspan has a single port and is designed to carry data and power over a standard CAT5e (or better) cable, delivered through all 4 pairs.$217.14 -
Bosch NPD-9501A Midspan, 95W, Single Port, AC In - 120 V AC, 230 V AC Input - 1 x RJ-45 Input Port(s) - 1 x RJ-45 Output Port(s) - 95 W
95 W Midspan
Learn More
The 95 W midspan is a high-power PoH (Power Over HDBase T) device that provides data and power between an Ethernet (remote network) switch and a MIC7000, MIC IP starlight 7000i, or MIC IP fusion 9000i camera.$431.60 -
Veracity PINPOINT Power over Ethernet Adapter - 1 x 10/100Base-TX Input Port(s) - 2 x 10/100Base-TX Output Port(s)
Veracity's PINPOINT adapter solves a common problem. How do you view the image or configuration page of an IP camera locally, without disconnecting it from the network and losing PoE power?
By routing installed Power over Ethernet power to the camera, but diverting its network connection to your laptop or PDA, PINPOINT lets you get your camera focused and set-up quickly and accurately.
Learn More -
Tycon Power 100W POE Power Source - 90 V AC, 264 V AC Input - 56 V DC, 1.80 A Output - Ethernet Output Port(s) - 100 W
The TP-POE-HP-56G Power Over Ethernet Power Sources offered by Tycon Power Systems are quality Gigabit midspan power sources for years of reliable operation even in the toughest conditions. They accept data-in to a shielded RJ45 Jack and provide surge protected data-out and power on the shielded RJ45 output jack. They work by supplying power to the remote device on all 8 Ethernet wires. The Ethernet spec supports distances up to 100m (328 feet).
Learn More
The units are autoranging so that they accept AC inputs from 90VAC to 264VAC (50/60 Hz) and they supply regulated 56VDC at the output. They have various protections for surge, short circuit, overload and overvoltage. They have total power output up to 100W.$189.75 -
Tycon Power TP-POE-24G POE Injector - 90 V AC, 264 V AC Input - 24 V DC, 800 mA Output - Ethernet Input Port(s) - Ethernet Output Port(s) - 19 W
The TP-POE Power Over Ethernet Power Sources offered by Tycon Power Systems are quality midspan power sources for years of reliable operation even in the toughest conditions. They accept data-in to a shielded RJ45 Jack and provide surge protected data-out and power on the shielded RJ45 output jack. They work by supplying power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). For the "R" model the voltage is reversed. 4,5(V-) and 7,8(V+). The Ethernet spec supports distances up to 100m (328 feet).
Learn More
There are models available that support 802.3af and 802.3at as well as models that support Gigabit Ethernet. The units are autoranging so that they accept AC inputs from 90VAC to 264VAC (50/60 Hz) and they supply regulated DC Voltage at the output. They have various protections for surge, short circuit, overload and overvoltage. The medium power models (TP-POE) have power output up to 24W and the high power models (TP-POE-HP) up to 50W. They are available in 18V, 24V and 48-56V DC Output with load regulation within 5%. The CI model has a special current sense LED which changes color when a POE device is plugged onto the CAT5 cable.
