Video Switchboxes

The HDMI and VGA + Stereo Audio HDBaseT over Cat6 Extender Wall Plate Transmitter is an ideal solution for extending audio/video signals from a Blu-ray- player and a laptop to a projector. This transmitter extends HDMI, VGA and Stereo Audio signals over a single Cat5e, Cat6 or Cat6a unshielded twisted pair network patch cable up to 115 feet at a 4K (4096 x 2160 at 30Hz, 4:4:4) for HDMI and 230 feet at a 1080p resolution for VGA. The rear cable connections for the Cat6 cable and the optional serial cable are set at 90 degrees, making connections in a wall box easy. The local HDMI output of the front of the wall plate allows an additional HDMI display to be supported via an HDMI cable. Switching between HDMI and VGA inputs is made easy with three options available. Automatic switching displays the last connected device, manual switching via the button on the front of the wall plate, or Serial RS232 switching which accepts serial commands from a control device, like the C2G TruLink A/V Controller. This solution is compatible with any operating system and is truly plug and play with no drivers or software required. This solution utilizes TruChoice power, which allows power to be supplied over the Cat5 cable to both the transmitter and receiver from a single power adapter placed at either the transmitter or the receiver end of the solution. HDBaseT technology supports HDCP and allows the Extended Display Identification Data (EDID) signals, i.e. communication of the display's capabilities, to pass through the extension solution ensuring that the content from the source is sent at the optimal resolution for the display. Built-in power surge protection and high ground loop immunity ensure high performance signal extension. This transmitter is compatible with any of the HDMI HDBaseT receivers offered by C2G and works with C2G DB9 to RJ25 Serial RS232 Cables.

Note: Stranded Cat5e/6/6a patch cables may be used for HDMI extension applications up to 230ft. Shielded, solid conductor Cat5e/6/6a network cabling is recommended for applications where the Cat5e/6/6a cable must be coiled, is run near other high-frequency signaling cables, or in high EMI/RFI environments.

For best performance use a -Cat6 Solid Shielded Patch Cable.

This switch box features a heavy-duty, easy-to-turn rotary switch enclosed in a metal case with rubber feet to protect your desk or tabletop. The rugged metal case withstands the rigors of everyday use, and helps prevent unwanted EMI/RFI interference. Each connector is wired straight-through in a pin-to-pin configuration to ensure compatibility.

This Matrix has 4 HDMI inputs and 2 HDMI outputs. It's a true matrix that can distribute any one of the 4 sources to either of 2 displays. It can work as a splitter to show same sources on 2 displays simultaneously.

The 4K 4 x 2 HDMI Matrix Switch provides unrivaled versatility when controlling video and audio output on high-resolution HDMI displays. Each input can be routed to any output, or the same input can be routed to all outputs or any combination, eliminating the need to manually move cables to display HDMI video from different sources on different screens.

• 4K support and pixel-perfect resolutions
  The switch supports sharp, UHD 4K video and works with wide range of resolutions from PC XGA to WUXGA 1920 x 1200 and HDTV/DTV resolutions 480i/480p, 576i/576p, 720p, 1080i, and 1080p. It also carries the high-speed digital video signaling of TMDS formats for 10-, 12-, 16-, or 32-bit Deep Color. Plus, it provides support for 19:10 aspect ratio, data rates up to 6.75 Gbps, and 3D formats.

• Digital audio support
  Support for Dolby TrueHD, Dolby Digital, Dolby Digital EX, DTS, DTS-HD, DTS-HD Master, DTS-EX, PCM, PCM2, and LPCM2.

• Ideal for any venue where multiple high-definition displays must be managed
  It's ideal for corporate theaters, meeting rooms, classrooms, and broadcasting studios. When used with digital signage, the switch enables you to quickly switch a display from one digital signage source to another.

• Easy switching
  Switch using front-panel buttons, the included IR remote controller, or an RS-232 connection.

• Works with all HDMI source devices
  Compatible with all HDMI source devices, PC monitors, plasma HD displays, HDTV, and audio receivers/amplifiers.

• Easy installation
• And more
  Remembers the last state during a power cycle.
  HDCP 2.0 compliant and Blu-ray ready.
  Supports auto EDID function, as well as manual copy for compatibility with every monitor.
  Front-panel LEDs show automatic scanning input and output status.

The ultimate controller for high definition and progressive scan video sources, this selector routes any of three source devices to each TV/monitor or one source to five TV/monitors. Connect all your HDTV products including DVD players, satellite receivers, cable set-top boxes, or gaming systems, and use the remote control or front panel buttons to watch any picture on any five plasma, CRT, LCD or projection televisions with complete independence!

This matrix switch offers three component video inputs, three stereo audio inputs, and three optical digital audio TOSLINK inputs. It will switch all these inputs to any of five outputs, with the audio following video. The matrix switch also comes with an infrared remote control that features discrete commands to make programming complex macros into your universal remote control system a snap. Compatible with all interlaced or progressive scan analog component video signals. Now you can take control of your system and watch what you want where you want, and do it with no compromises!