Transceivers/Media Converters

• Easy installation and transparent operation, no software required.
• Enables you to send data much farther and more securely than what's possible for copper Ethernet.
• Auto negotiates for speed to achieve the best possible mode of operation.
• UTP port supports full- and half-duplex operation.
• To prevent congestion supports automatic and manual pause function for flow control.
• Supports jumbo frames up to 10,240 bytes.
• Remote fault indicators signal loss of link for far-end fault and link fault conditions.
• Loopback mode supports end-to-end testing.
• Manual switches give you the option to control port operation.
• Hardware available for mounting the converter to a wall or a DIN rail.
• Can also be used in the FlexPoint 14-Slot Power Chassis or the FlexPoint 5-Position Rackmount Kit.
• RoHS compliant.

FlexPoint™ Media Converters from Black Box are versatile and cost-effective standalone converters that provide the ultimate in flexibility and reliability for your expanding LAN. The incredible variety and versatility of this system make it ideal for networks that are subject to constant upgrades and changes. Tailor the system to your requirements.

Get the converters you need now and use them individually. Then, when your LAN grows, mount your converters on the wall, in the FlexPoint 5-Position Rackmounting Kit, or in the FlexPoint Power Chassis. The chassis holds 14 converters and single or dual AC or DC power supplies. The model featured here supports Gigabit-speed communications. It connects to 10-, 100-, or 1000-Mbps Ethernet on the copper side and to 1000-Mbps single-mode cabling on the fiber side, extending network communications up to 12 kilometers (7.4 mi.) over single-mode fiber.

For easy installation and troubleshooting, LEDs indicate the availability of power, port activity, and link status, and duplex mode. Remote fault indicators signal loss of link for far-end fault and link fault conditions. Detection of these indicators or link modes can be propagated to the other port to notify connected end devices of faults.

Learn More

Compact desktop enclosure features (1) 10GBASE-T port plus a slot for an SFP+ transceiver (available separately).

Learn More

• Supports ThinNet cable to 185 meters (606.9 ft.) and up to 30 stations.
• UTP crossover switch plus automatic polarity detection.
• Switch-selectable ThinNet line termination.
• LEDs display status.
• Hardware available for mounting the converter to a wall or a DIN rail.
• Can also be used in the FlexPoint 14-Slot Power Chassis or the FlexPoint 5-Position Rackmount Kit.

FlexPoint™ Modular Media Converters from Black Box are versatile and cost-effective standalone media converters that you can upgrade to a chassis-based system. They provide the ultimate in flexibility and reliability for your expanding multimedia LAN. FlexPoint offers a very wide range of converter options, including media converters for legacy systems such as ThinNet and Token Ring. Your choices include:

• Ethernet
• Fast Ethernet
• Gigabit Ethernet
• Token Ring
• UTP
• Single-mode fiber
• Multimode fiber
• ThinNet
• Single-mode to multimode fiber converters
• Long-distance fiber converters
• ATM OC-3
• ATM OC-12
• 10/100 rate converters
• TI/EI Line Drivers

The incredible variety and versatility of this system make it ideal for networks that are subject to constant upgrades and changes. Tailor the system to your requirements. Get the media converters you need now and use them individually. Then, when your LAN grows, mount your media converters on the wall, in the 5-Position Rackmounting Kit, or as modules in the Power Chassis. The Power Chassis holds 14 media converters and a Single or Dual AC or DC Power Supply. Also, be sure to see the rest of the FlexPoint family:

• FlexPoint 10BASE-T to 10BASE-FL Media Converters (LMC212A-MM-R3, etc.)
• FlexPoint 100BASE-TX to 100BASE-FX Media Converters (LMC213A-MMST-R2, etc.)
• FlexPoint Token Ring UTP to Fiber Media Converters (LTM215A)
• FlexPoint 10/100 Rate Converters (LMC100A-R2, etc.)
• FlexPoint Gigabit UTP to Fiber Media Converters (LMC1003A-R3, etc.)
• FlexPoint 100-Mbps Fiber to Fiber Converters (LMC252A-ST, etc.)
• FlexPoint 1000-Mbps Fiber to Fiber Mode Converters (LMC1001A, etc.)
• FlexPoint Fiber-to-Fiber Mode Converters for ATM OC-3 and OC-12 (LMC156A-ST, etc.)
• FlexPoint T1/E1 Copper to Fiber Line Drivers (MT660A-MM, etc.)
• FlexPoint RS-232 to Fiber Converters (ME660A-MST, etc.)

Questions? Contact our FREE Tech Support.

Learn More

Further Details

• Hardware available for mounting the converter to a wall or a DIN rail.
• Can also be used in the FlexPoint 14-Slot Power Chassis or the FlexPoint 5-Position Rackmount Kit.
• Adapts automatically to 10-Mbps half-duplex or 20-Mbps full-duplex Ethernet.
• Increases bandwidth and distance in full-duplex operation.
• A UTP crossover switch eliminates the need for a crossed cable.

The FlexPoint™ Modular Media Conversion System
The FlexPoint™ Modular Media Conversion System from Black Box provides versatile and cost-effective standalone converters that you can use individually or upgrade to a chassis-based system. They provide the ultimate in flexibility and reliability for your expanding multimedia LAN.

The incredible variety and versatility of this system make it ideal for networks that are subject to constant upgrades and changes.

Tailor the system to your requirements. Get the converters you need now and use them individually. Then, when your LAN grows, mount your converters on the wall, in the FlexPoint 5-Position Rackmounting Kit, or in the FlexPoint Power Chassis. The chassis holds 14 converters and single or dual AC or DC power supplies.

Learn More

• Hardware available for mounting the converter to a wall or a DIN rail.
• Can also be used in the FlexPoint 14-Slot Power Chassis or the FlexPoint 5-Position Rackmount Kit.
• Adapts automatically to 10-Mbps half-duplex or 20-Mbps full-duplex Ethernet.
• Increases bandwidth and distance in full-duplex operation.
• A UTP crossover switch eliminates the need for a crossed cable.

About the Flexpoint Modular Media Conversion System

The FlexPoint™ Modular Media Conversion System from Black Box provides a versatile and cost-effective standalone converters that you can use individually or upgrade to a chassis-based system. They provide the ultimate in flexibility and reliability for your expanding multimedia LAN. The incredible variety and versatility of this system make it ideal for networks that are subject to constant upgrades and changes. Tailor the system to your requirements. Get the converters you need now and use them individually. Then, when your LAN grows, mount your converters on the wall, in the FlexPoint 5-Position Rackmounting Kit, or in the FlexPoint Power Chassis. The chassis holds 14 converters and single or dual AC or DC power supplies. Also, be sure to see the rest of the FlexPoint family:

• FlexPoint 10BASE-T to BNC Media Converter (LMC210A)
• FlexPoint 100BASE-TX to 100BASE-FX Media Converters (LMC213A-MMST-R2, etc.)
• FlexPoint Token Ring UTP to Fiber Media Converters (LTM215A)
• FlexPoint 10/100 Rate Converters (LMC100A-R2, etc.)
• FlexPoint Gigabit UTP to Fiber Media Converters (LMC1003A-R3, etc.)
• FlexPoint 100-Mbps Fiber to Fiber Converters (LMC252A-ST, etc.)
• FlexPoint 1000-Mbps Fiber to Fiber Mode Converters (LMC1001A, etc.)
• FlexPoint Fiber-to-Fiber Mode Converters for ATM OC-3 and OC-12 (LMC156A-ST, etc.)
• FlexPoint T1/E1 Copper to Fiber Line Drivers (MT660A-MM, etc.)
• FlexPoint RS-232 to Fiber Converters (ME660A-MST, etc.) Questions? Contact our FREE Tech Support.

Learn More