Transceivers/Media Converters
-
Omnitron Systems FlexPoint 4321-1 AUI to 10BASE-T Transceiver - 1 x Network (RJ-45) - 10Base-T - 0.10 km - Wall Mountable, External, Rack-mountable, Rail-mountable
The FlexPoint 10AUI/T is a 10BASE-T to Attachment Unit Interface (AUI) converter. The transceiver provides the physical medium conversion between units equipped with the AUI and the unshielded twisted pair (UTP) connectors.
The FlexPoint 10AUI/T Transceiver operates in Half-Duplex. It supports switch-enabled SQE function, also known as heartbeat. This signal tests the collision detection electronics of the transceiver, and informs the Ethernet interface that the collision detection circuits and signal paths are working correctly.
Learn More$334.20 -
FlexPoint 100Mbps Ethernet Fiber Media Converter RJ45 SC Multimode 5km - 1 x 100BASE-TX; 1 x 100BASE-FX; US AC Powered; Lifetime Warranty
The FlexPoint 100Fx/Tx is a 100BASE-FX fiber to 100BASE-TX UTP media converter that provides reliable and cost-effective network connectivity and fiber extension.
The FlexPoint 100Fx/Tx UTP port auto-negotiates to the highest level of performance supported by the attached device. Manual switch settings and LED indicators with on-the-label descriptions enable easy configuration to legacy devices or matching specific network requirements.- The FlexPoint 100Fx/Tx is a 100BASE-FX fiber to 100BASE-TX UTP media converter
- Supports auto-negotiation of duplex modes for easy installation
- Extends network distances up to 120km
- Supports most network interfaces with a wide variety of cable and connector types
- Labeled status LEDs and switches for quick and easy installation
- Features a crossover switch for connection to switches or workstations
- Wall-mount or rack-mount on a 5-Module shelf or in a 14-Module power-redundant FlexPoint
- Powered Chassis
- Completely software independent with no installation of drivers required
- Peace-of-mind reliability backed by a lifetime warranty and free 24/7 technical support
$237.18 -
iConverter T1/E1 Single-Fiber Media Converter RJ48 SC Single-mode 20km BiDi - 1 x T1/E1; 1 x SC Single-mode Single-Fiber (1550/1310); Wall-Mount Standalone; US AC Powered; Lifetime Warranty
iConverter T1/E1 Single-Fiber Media Converter RJ48 SC Single-mode 20km BiDi - 1 x T1/E1; 1 x SC Single-mode Single-Fiber (1550/1310); Wall-Mount Standalone; US AC Powered; Lifetime Warranty Learn More$1,193.44 -
iConverter T1/E1 Single-Fiber Media Converter RJ48 SC Single-mode 20km BiDi - 1 x T1/E1; 1 x SC Single-mode Single-Fiber (1550/1310); Wall-Mount Standalone; Univ. AC Powered; Lifetime Warranty
iConverter T1/E1 Single-Fiber Media Converter RJ48 SC Single-mode 20km BiDi - 1 x T1/E1; 1 x SC Single-mode Single-Fiber (1550/1310); Wall-Mount Standalone; Univ. AC Powered; Lifetime Warranty Learn More$1,323.03 -
Omnitron Systems iConverter T1/E1 Media Converter - 1 x SC Ports - T1/E1 - 40 km - Internal
The iConverter T1/E1 media converter provides standard T1 (1.544Mbps) or E1 (2.048Mbps) copper to fber conversion and can be used to extend the demarcation point between service provider and networking equipment. T1/E1 media converters operate in pairs, extending distances over fber, which improves noise immunity, quality of service, intrusion protection and network security.
Learn More$1,605.43 -
FlexPoint 100Mbps Ethernet Fiber Media Converter RJ45 SC Single-Mode 30km - 1 x 100BASE-TX; 1 x 100BASE-LX; No Power Adapter; Lifetime Warranty
The FlexPoint 100Fx/Tx is a 100BASE-FX fiber to 100BASE-TX UTP media converter that provides reliable and cost-effective network connectivity and fiber extension.
The FlexPoint 100Fx/Tx UTP port auto-negotiates to the highest level of performance supported by the attached device. Manual switch settings and LED indicators with on-the-label descriptions enable easy configuration to legacy devices or matching specific network requirements.- The FlexPoint 100Fx/Tx is a 100BASE-FX fiber to 100BASE-TX UTP media converter
- Supports auto-negotiation of duplex modes for easy installation
- Extends network distances up to 120km
- Supports most network interfaces with a wide variety of cable and connector types
- Labeled status LEDs and switches for quick and easy installation
- Features a crossover switch for connection to switches or workstations
- Wall-mount or rack-mount on a 5-Module shelf or in a 14-Module power-redundant FlexPoint
- Powered Chassis
- Completely software independent with no installation of drivers required
- Peace-of-mind reliability backed by a lifetime warranty and free 24/7 technical support
$420.99
