KVM Switchboxes

Support for crisp, clean 4K60 UHD DisplayPort 1.2 video
With DisplayPort 1.2, The KVM switch supports today's demanding resolutions at up to 4K@60Hz and also supports up to 1080@120Hz refresh rates.

Instant switching
Switch between two DisplayPort equipped computers with ease only using a single DisplayPort monitor. The KVM switch features a Quick Change wired switch button that lets you instantly switch between the two computers.

Reduced cable clutter
This switch will not crowd your workspace. It includes a DisplayPort video interface and two sets of USB KVM and Audio/Mic combo cables for easy connection to your two computers, keeping your space clean.

USB 2.0 ports
Features two USB 2.0 keyboard and mouse ports. The ports are transparent USB hub ports that have full driver support which means this device will work with your advanced keyboard and mouse.

The ports can also be connected to other high-speed USB devices like USB disk storage, etc.

No additional cables required. This product comes completely equipped with Fixed USB KVM/Audio and Mic combination cables:

• Combination cables length = 1.3m / 4.25'
• Quick Change Button cables length = 1.5m / 5'

• Enables USB 2.0 peripheral switching.
• Autoscan function enables you to automatically scan and monitor attached computers.
• Works with Windows® 98/Me/XP, Windows 2000, Windows NT®, Linux®, NetWare®, and Mac® OS operating systems.

Control and switch multiple PS/2 or USB CPUs and their keyboard, video, mouse, and audio connections with the ServSwitch DT Pro II KVM switch. Link PS/2 KVM to PS/2 CPUs, USB KVM to PS/2 CPUs, PS/2 KVM to USB CPUs, or USB KVM to USB CPUs. Plus, you can connect audio and USB peripherals to the KVM switch.

The ServSwitch DT Pro II provides superior video resolution (up to 1920 x 1440) and crystal-clear audio. Choose from two ways to switch your KVM and CPUs and USB peripherals: via front-panel buttons or PC hotkeys. Simply press the front-panel button that corresponds to the CPU you want to switch or use hotkeys to start Autoscan. The Autoscan function enables you to automatically scan and monitor all computers, one by one, that are connected to the DT Pro II.
Use hotkeys to select or switch channels, bind or unbind switching, or to start or stop autoscan. You can:

• Select PC channel.
• Select hub port control.
• Select audio and microphone channel.
• Bind PC and hub port control switching.
• Unbind PC and hub port control switching.
• Bind PC and audio/microphone switching.
• Unbind PC and audio/microphone switching.
• Switch to next lower PC channel.
• Switch to next higher PC channel.
• Previous PC channel.
• Turn beep sound on/off.
• Define hotkey switch to preceding sequence.
• Start Autoscan.
• Start Autoscan with programmable delay time.
• Stop Autoscan.

The ServSwitch DT Pro II supports Microsoft® IntelliMouse® and other mice. The unit's USB ports comply with the USB 2.0 standard. What's more, the DT Pro II is compatible with many common operating systems, including Windows 98/Me/XP, Windows 2000, Windows NT, Linux, NetWare, and Mac OS.

Control two PS/2 computer CPUs with just one PS/2 keyboard, PS/2 mouse, and a monitor. Compact, portable, and powered by the interface, the ServSwitch DT Basic II KVM Switch works with most windows operating systems and requires no complicated setup. Its small footprint enables you to use it on or under a desk.

Control up to two PS/2 computer CPUs with just one PS/2 keyboard, PS/2 mouse, and a monitor. Compact, portable, and powered by the interface, the ServSwitch DT Basic II works with most Windows operating systems and requires no complicated setup. Its small footprint enables you to use it on or under a desk. Switching CPUs is easy. To select ports, use either hotkeys or frontpanel buttons. When you switch manually, the buttons' LEDs light to show you the corresponding active ports. Or you can use the switch's Autoscan function to scan all connected computers automatically, one by one, at 10-second intervals. This way, you can monitor computer activity without having to press any keys or buttons.

Control up to four PS/2 computer CPUs with just one PS/2 keyboard, PS/2 mouse, and a monitor. Compact, portable, and powered by the interface, the ServSwitch DT Basic II works with most Windows operating systems and requires no complicated setup. Its small footprint enables you to use it on or under a desk. Switching CPUs is easy. To select ports, use either hotkeys or frontpanel buttons. When you switch manually, the buttons' LEDs light to show you the corresponding active ports. Or you can use the switch's Autoscan function to scan all connected computers automatically, one by one, at 10-second intervals. This way, you can monitor computer activity without having to press any keys or buttons.