Audio & Video Consoles/Extenders
-
Kramer HDMI HDCP 2.2 Compact Transmitter over PoC Long-Reach DGKat - 1 Input Device - 1 Output Device - 295.28 ft Range - 1 x Network (RJ-45) - 1 x HDMI In - 1080p, 1080i - Twisted Pair - Rack-mountable
The PT-571 is a twisted pair transmitter for HDMI signals. The PT-571 converts an HDMI signal to a single twisted pair signal and the PT-572 converts the twisted pair signal back to an HDMI signal.
Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel) HDTV Compatible HDCP Compliant DGKat™ Signal Integration - Kramer's unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables HDMI Support 3D Pass-Through System Range - Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables. Note: Transmission range depends on the signal resolution, graphics card and display used. If using third-party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly EDID PassThru - Passes EDID signals between the source and display Status LED - Lights red when receiving power only, orange when output and power are attached, and yellow when both an active input and output are attached Power Connect™ System - A single connection to the transmitter powers the receiver Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side-by-side in a 1U rack space with the recommended rack adapter Learn More
FEATURES
Max. Data Rate - 4.95Gbps (1.65Gbps per graphic channel)
HDTV Compatible
HDCP Compliant
DGKat™ Signal Integration - Kramer's unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables
HDMI Support
3D Pass-Through
System Range - Up to 90m (295ft) at 1080i @60hz or up to 70m (230ft) at 1080p @ 60hz when using Kramer DGKat cables. Note: Transmission range depends on the signal resolution, graphics card and display used. If using third-party shielded CAT cables, both ends of the shield must be soldered to the connectors for the products to function properly
EDID PassThru - Passes EDID signals between the source and display
Status LED - Lights red when receiving power only, orange when output and power are attached, and yellow when both an active input and output are attached
Power Connect™ System - A single connection to the transmitter powers the receiver
Ultra-Compact Pico TOOLS™ - 4 units can be rack mounted side-by-side in a 1U rack space with the recommended rack adapter$187.84 -
Kramer PT-572+ Video Extender Receiver - 1 Output Device - 295.28 ft Range - 1 x Network (RJ-45) - 1 x HDMI Out - Twisted Pair - Category 5 - Conference Room, Boardroom, Home Theater, Training Room, Presentation System - Rack-mountable
Kramer PT-572+ Video Extender Receiver - 1 Output Device - 295.28 ft Range - 1 x Network (RJ-45) - 1 x HDMI Out - Twisted Pair - Category 5 - Conference Room, Boardroom, Home Theater, Training Room, Presentation System - Rack-mountable Learn More$187.48 -
Kramer Minicom AVDS CAT5 Audio Video Display Power Remote - 1 Output Device - 360.89 ft Range - 1 x Network (RJ-45) - 2 x VGA InVGA Out - Full HD - 1920 x 1080 - Twisted Pair - Category 7
The Audio Video Display System is a distribution system for computer graphics video up to 1080p and mono audio signals. The system, including a broadcaster, splitter and receivers, can distribute input signals over CAT 5 cable to hundreds of displays.
Learn More$118.40 -
Kramer HDMI over IP Transmitter - 1 Input Device - 1 x Network (RJ-45) - 1 x HDMI In - Full HD - 1920 x 1080 - Twisted Pair - Category 7 - Rack-mountable
The KDS-EN2T is an IP-based transmitter for HDMI signals. Using JPEG2000 compression technology, the KDS-EN2T sends a visually lossless HD image with digital stereo over a 1000BaseT LAN to a KDS-EN2R receiver for multicasting, video wall and digital signage applications.
- High Flexibility - Flexible and scalable HDMI 1080p for video broadcasting with Gigabit Ethernet LAN.
- High Scalability - Up to 9 transmitters and more than 81 receivers possible in a video wall system, as well as over 200 receivers from each transmitter in multicasting mode.
- Multicasting and Broadcasting Architecture - Each channel requires about 55Mbps.
- Cost Efficient Infrastructure - Transmits an HDMI signal over one CAT5e/6/7 cable.
- HDTV Compatible.
- Controls - Group ID can be defined either via the built-in DIP-switches or by using the remote utility.
- RS-232 Pass-Thru - Controls the HDMI display from the transmitter side.
- Compact DigiTOOLS® - With a built-in mounting plate for versatile installation.
$632.53 -
Kramer KW-14R Wireless HD Receiver - 1 Output Device - 100 ft Range - 1 x USB - 1 x HDMI Out - Full HD - 1920 x 1080
The KW-14R is a high-definition, wireless, HDMI receiver for indoor use. Up to four KW-14R receivers can receive from one KW-14T transmitter and up to three KW-14T transmitters can be paired with one KW-14R receiver.
- Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel), Deep Color up to 12-bit.
- Secure Link - Uses AES-128 bit encryption.
- Connection Capacity - Up to four receivers can receive from one transmitter simultaneously; up to three transmitters associated with one receiver at any given time.
- Transmission Range - Up to 30m (100ft) including through walls and furniture.
- Automatic Frequency Selection - Selects the most suitable frequencies to prevent RF interference.
- Auto EDID Adjustment - To allow multi-screen support.
- IR Remote Control - Enables the OSD menu to be displayed on the output display.
- OSD (On Screen Display) - For simplified setup and configuration.
- HDCP Compliant - HDCP sources are supported only when all connected displays support HDCP.
- Zero Latency.
- Automatic Sleep Mode - After three minutes when no input or link is detected.
APPLICATIONS
- Meeting rooms
- Presentation and multimedia applications
- Short range video and audio distribution
$438.65 -
Kramer OPS-Compatible HDMI Receiver with Ethernet & RS-232 over Extended-Reach HDBaseT - 1 Output Device - 590.55 ft Range - 2 x Network (RJ-45) - 1 x HDMI Out - Full HD - 1920 x 1080 - Twisted Pair
OPS-1 is an OPS-compatible HDBaseT receiver for displays and AV devices with standard Intel OPS-compatible card slots. It is a high-performance, extended-reach HDBaseT 1.0 receiver for full HD HDMI, Ethernet and RS-232 signals over twisted pair. It extends video signals to up to 100m (330ft) over CAT copper cables at up to 1080p@60Hz video resolution.
- High Performance Standard Extender - Professional HDBaseT extender for providing extended-reach signals over twisted-pair copper infrastructures. OPS-1 is a standard extender that can be directly plugged to HDBaseT-compliant OPS-slot of market-available displays and AV products. For optimum extension reach and performance, use recommended Kramer cables.
- HDMI Signal Extension - HDMI 1.4 and HDCP 1.4 compliant. Supports deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, and 3D. EDID and CEC signals are passed through from the source to the display.
- Multi-channel HDMI Audio Extension - Up to 8 channels of digital stereo uncompressed signals for supporting studio-grade surround sound.
- Ethernet Extension - Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
- Bidirectional RS-232 Extension - Serial interface data flows in both directions, allowing data transmission and device control.
- Cost-effective Maintenance - Status LED indicator to facilitate easy local maintenance and troubleshooting.
- Easy and Elegant Installation - Directly plugged into OPS-compatible AV devices, drawing power from the device. Provides single cable connectivity for all HDBaseT signals.
- Long-distance AV and LAN signal extension for multi-room, large dividable auditoriums and lecture hall connectivity
$222.93
