Network & Communication

The Black Box DisplayPort Extender is a high-performance KVM extender that enables you to locate your critical computing hardware in a secure and temperature-controlled environment away from the user workstation while maintaining the same user desktop experience.

It can transmit either two 1920 x 1200 video streams or one higher resolution video stream (2560x1600 WQXGA), digital audio (S/PDIF), analog audio, Hi-Speed USB 2.0, and USB 2.0 (full and low speed) over CATx cables.

Perfect digital video, real-time control
The system is uncompressed, sending every pixel of every frame without loss. The receiver supports DisplayPort Dual Mode (DP++), meaning monitors that only support HDMI or DVI can be used (with the correct adapter cable).

Single CATx cable
Video, USB, and audio all pass along a single cable. A second CATx cable is required for the Hi-Speed USB 2.0 extension and increased video bandwidth.

Up to 492 feet (150 m) extension distances
Distance is dependent on the monitor resolution, the number of monitors, cable type, and the number of patch panels and couplers.

USB 2.0
Enables connection of any USB human interface device from mice and keyboards through to graphics tablets, jog wheels, joysticks, and 3D explorers. Mass storage devices and isochronous devices such as webcams and headsets can be used through the transparent USB 2.0 Hi-Speed port.

EDID management
The system has intelligent EDID management to allow the true characteristics of the monitor to be passed back to the computer.

Plug and play
This extender solution is plug-and-play. There is no need for drivers or software to be installed.

Digital audio
Supports the S/PDIF interface via an optical 3.5mm jack socket (dual use with analog audio via mini Toslink).

HD-quality analog audio
HD-audio quality (stereo channel 24 bit sampled at 96kHz) is available to transfer audio from local to remote for Line In / Line. Headsets with integrated microphones are also supported.

SServSwitch ACU6201A KVM Console/Extender send VGA video and signals for USB keyboards, mice, and other human interface devices (HID) up to 1000 feet (300 m) over ordinary CAT5, CAT5e, or CAT6 cable. ServSwitch ACU6201A Console/Extender delivers crystal-clear video and features emulated DDC on the local unit to ensure compatibility with multihead graphics cards. The remote unit features transparent DDC, reading DDC tables from all attached monitors, then transferring and storing data in the local unit to support non-standard displays.

Looking for a cost-effective SFP+ solution that enables higher port densities and greater bandwidth? Choose the 1310-nm Singlemode SFP (LC) 10G optical transceiver, which transmits and receives optical data over singlemode optical fiber up to 10 km.

Meets Tough Industry Standards to Ensure Optimum Data Transmission
Complies with the SFF-8431 electrical specification, as well as the optical specification defined by IEEE 802.3ae.

Delivers Low EMI and Consumes Low Power
Because the SFP transmits signals over fiber, the data is not compromised by electromagnetic interference (EMI). The device also consumes very low power.

Transmits Data Fast
The SFP supports data rates from 1.25 to 11.3 Gbps for smooth, fast data transmission.

Works in a Wide Temperature Range
The SFP operates at industrial temperatures ranging from -40 to +185° F (-40 to 85° C).