Network & Communication
-
HPE M-Series 100GbE QSFP28 1310nm PSM4 500m Transceiver - For Optical Network, Data Networking - 1 x LC/MPO 100GBase-PSM4 Network - Optical Fiber - Multi-mode, Single-mode - 100 Gigabit Ethernet - 100GBase-PSM4 - Hot-pluggable
Does interconnect reliability and reach impacting your infrastructure? HPE StoreFabric M-Series Transceivers are designed to increase the performance of network connectivity, requiring high-bandwidth, low-latency connections between compute nodes and switch nodes. To verify superior system performance, HPE M-Series Transceivers are tested in an environment to a Bit Error Rate of less than 1E-15. Delivering compatibility with Hewlett Packard Enterprise storage solutions and networking adapters.
Features
Advanced Transceiver Features
The HPE StoreFabric M-Series Transceivers provides temperature monitoring with notification.
Designed to increase the performance of network connectivity, requiring high-bandwidth, low-latency connections between compute nodes and switch nodes.
QSFP28 form factor to reduce cost and improve reliability while delivering industry compatibility.
Rigorous Production Testing Delivers Ease of Installation, Performance, and Durability
HPE StoreFabric M-series Transceivers exceed industry requirements to deliver high performance and high quality resulting in low or no faults over solution life.
Compliance with Restriction on Hazardous Substances (RoHS) directive.
Transceivers are designed for growing bandwidth in data centers and providing high speed and efficient connectivity.
Learn More -
HPE SN2700M 100GbE 16QSFP28 Switch - Manageable - 2 Layer Supported - Modular - Optical Fiber - 1U - Rack-mountable
HPE StoreFabric M-Series SN2700M Ethernet Switch
With an increasing need to access data faster and accommodate growing workloads, rising levels of east-west traffic, and new storage arrays based on flash storage technologies, a high bandwidth, low-latency network becomes paramount. The HPE StoreFabric M-Series SN2700M Ethernet switches offer a 100GbE-based network platform capable of delivering unbelievable networking speed and agility to keep pace with the most intense workloads small- to large-scale enterprises can produce. With port speeds spanning from 1Gb/s to 100 Gb/s and a switching capacity of 6.4Tb/s from 32 ports at 100GbE, the switch enable non-blocking throughput at wire-speed transfers-across all packet sizes. All this enables the SN2700M to deliver a landmark 9.52 Bpps processing capacity and an uncompromising 300ns cut-through latency in a compact 1RU form factor. The M-series are perfect for Top-Of-Rack (TOR) deployments and optimized for virtualized environments, hyperconverged infrastructure, and storage deployments.
HPE StoreFabric M-Series Ethernet switches give you the right network bandwidth with consistent performance for highperformance and storage workloads. Delivering the highest feature set at the right price allows you to get the most out of your Ethernet infrastructure to best support a variety of use cases, including media and entertainment; streaming video, financial services industry, virtualized data centers, and next generation storage, including software-defined storage and NVMe flash. With HPE M-series switches, you can:
Optimize Storage- Modernize your network to eliminate limitations and bottlenecks that can be caused by the addition of flash storage.
Enjoy efficient network performance-Avoid packet loss, provide predictable performance with line-rate packet delivery across all ports and all packet sizes.
Realize breakthrough economics-Make better use of your data center resources with the highest port density per rack unit and the industry's lowest power consumption.
Accelerate business innovation-Support 1/10/40Gbps for existing workloads and deliver 25/50/100Gbps Ethernet to respond quickly to business needs and stay on the leading edge of technology.
The StoreFabric M-Series SN2700 switch provides a high density 100GbE switching solution in single Rack Unit (RU) for the growing demands of today's storage, database, and data center environments. The SN2700 carries a unique design to accommodate the highest rack performance. Available in 16 or 32 ports, the SN2700 carries a switching capacity of 6.4Tb/s with 9.52Bpps processing capacity.
SN2700M is available in two models:
- HPE StoreFabric SN2700M 100GbE 32QSFP28
- HPE StoreFabric SN2700M 100GbE 16QSFP28
-
HPE 100Gb QSFP28 LC SWDM4 Multi-mode 100m Transceiver - For Data Networking, Optical Network - 1 x LC/MPO 100GBase-SWDM4 Network - Optical Fiber - Single-mode, Multi-mode - 100 Gigabit Ethernet - 100GBase-SWDM4
Does interconnect reliability and reach impacting your infrastructure? HPE StoreFabric Ethernet Transceivers, Active Optical Cables and Direct Attached Copper cables are designed to increase the performance of network connectivity, requiring high-bandwidth, low-latency connections between compute nodes, Storage nodes and switch nodes. To verify superior system performance, HPE StoreFabric Ethernet Transceivers, AOCs and DACs deliver compatibility with Hewlett Packard Enterprise storage solutions and networking adapters.
Features
Advanced Transceiver Features
Designed to increase the performance of network connectivity, requiring high-bandwidth, low-latency connections between compute nodes and switch nodes.
QSFP28 form factor to reduce cost and improve reliability while delivering industry compatibility.
Rigorous Production Testing Delivers Ease of Installation, Performance, and Durability
HPE StoreFabric Transceivers exceed industry requirements to deliver high performance and high quality resulting in low or no faults over solution life.
Compliance with Restriction on Hazardous Substances (RoHS) directive.
Transceivers are designed for growing bandwidth in data centers and providing high speed and efficient connectivity.
Breakout Copper DAC and Optical AOC Cables
Allows Ethernet switches to delivers 100GbE ports, which may further breakout into four 25GbE ports or support for 40GbE, which can further breakout into four 10GbE ports.
Optimized port configuration enables high-speed rack connectivity to the server at 10GbE or 25GbE speeds with 100GbE uplink ports.
Learn More -
HPE StoreFabric SN2010M 25GbE 18SFP28 4QSFP28 Switch - Manageable - 25 Gigabit Ethernet - 25GBase-X - 3 Layer Supported - Modular - 57 W Power Consumption - Optical Fiber - 1U - Rack-mountable
How can you provide fast, reliable and cost-effective connectivity in the data center with predictable performance and investment protection? The HPE StoreFabric SN2010M Switch is ideal for modern server and storage networks. Supporting port speeds of 1, 10, 25, 40, 50 and 100GbE, they deliver predictable performance and zero packet loss at line-rate. Its unique port counts and half-width form factor allows for up to two HPE StoreFabric SN2010M Switch units to be deployed side-by-side for increased density and high-availability in a single rack unit making it the perfect top-of-rack switch. Storage-specific features combined with an efficient design provides enterprise-level performance with attractive economics and outstanding ROI. Networks built on Hewlett Packard Enterprise M-series switches are fast, reliable, and scalable while also being affordable. This makes these switches ideal for storage, hyperconverged, financial services, Big Data and media and entertainment deployments.
Features
Unleash Storage Performance and Improve Flash ROI
The HPE StoreFabric SN2010M Switch is a half-width 10/25GbE and 40/100GbE Ethernet switch designed for primary, secondary storage, and hyper converged infrastructures. This top-of-rack (ToR) solution packs 18-ports of 10/25GbE and 4-ports of 40/100GbE that can be reconfigured with breakout cables.
Delivers low latency for 10/25GbE and 40/100GbE switching, featuring a robust implementation of data, control and management planes, and offers a compact form factor and low power consumption.
Provides ultra-low latency of under 300 ns port-to-port. This is advantageous for flash storage which has moved latency bottlenecks from storage access to the network, as well as for the burst nature of today's software defined and cloud data centers traffic.
The buffering architecture provides superior micro-burst absorption for applications that experience data surges across different parts of the network at random intervals.
Ideal for Demanding Enterprise Data Centers and Storage Environments
The HPE StoreFabric SN2010M Switch provides a flexible combination of ports, allowing for great flexibility, efficiency, and simplification of scale-out environments, saving on total cost of ownership.
Unique port configurations allow high-speed rack connectivity to the server at 1/10GbE or 25GbE speeds with 40/100GbE uplink ports that allow for a variety of blocking ratios that suit specific application requirements.
Enhanced for RDMA over Converged Ethernet (RoCE), full buffer utilization, and zero packet loss combined into a small form factor with low latency make it the ideal switch for the Ethernet storage fabric (ESF).
Enhanced for Storage and Hyper Converged Environments
The HPE StoreFabric SN2010M Switch provides high port density in a single rack unit, allowing for increased capacity and efficiency, simplifying scale-out environments and saving on total cost of ownership.
With its unique half-width form factor and port counts, this Ethernet switch allows for two HPE StoreFabric SN2010M Switch units to be deployed side-by-side allowing for increased density and high-availability in a single rack unit, making it the ideal top-of-rack switch.
Designed to use less electric power than competing switches, the SN2010M provides for one of the industry's lowest power draws, producing less heat than competing products and reducing operating expenses.
Learn More -
HPE 10Gb BASE-T SFP+ RJ45 30m Transceiver - For Data Networking - 1 x RJ-45 10GBase-T LAN - Twisted Pair10 Gigabit Ethernet - 10GBase-T
Does interconnect reliability and reach impacting your infrastructure? HPE StoreFabric Ethernet Transceivers, Active Optical Cables and Direct Attached Copper cables are designed to increase the performance of network connectivity, requiring high-bandwidth, low-latency connections between compute nodes, Storage nodes and switch nodes. To verify superior system performance, HPE StoreFabric Ethernet Transceivers, AOCs and DACs deliver compatibility with Hewlett Packard Enterprise storage solutions and networking adapters.
Features
Advanced Transceiver Features
Designed to increase the performance of network connectivity, requiring high-bandwidth, low-latency connections between compute nodes and switch nodes.
QSFP28 form factor to reduce cost and improve reliability while delivering industry compatibility.
Rigorous Production Testing Delivers Ease of Installation, Performance, and Durability
HPE StoreFabric Transceivers exceed industry requirements to deliver high performance and high quality resulting in low or no faults over solution life.
Compliance with Restriction on Hazardous Substances (RoHS) directive.
Transceivers are designed for growing bandwidth in data centers and providing high speed and efficient connectivity.
Breakout Copper DAC and Optical AOC Cables
Allows Ethernet switches to delivers 100GbE ports, which may further breakout into four 25GbE ports or support for 40GbE, which can further breakout into four 10GbE ports.
Optimized port configuration enables high-speed rack connectivity to the server at 10GbE or 25GbE speeds with 100GbE uplink ports.
Learn More -
HPE AP-514 802.11ax 5.40 Gbit/s Wireless Access Point - 2.40 GHz, 5 GHz - MIMO Technology - 2 x Network (RJ-45) - Bluetooth 5 - Ceiling Mountable, Wall Mountable, Rail-mountable
With an increasing number of mobile and Internet of Things (IoT) devices reliant on wireless access, networks must be capable of accommodating a diverse mixture of device types, applications and services.
Learn More
The Aruba 510 series campus access points with 802.11ax technology are designed to deliver high performance access for mobile and (IOT) devices in environments where density is an issue. The 510 series uses 802.11ax features to efficiently and simultaneously serve multiple clients and traffic types in dense environments, increasing data rates for both individual device and overall system.
The 510 series support all mandatory and several optional 802.11ax features, which includes up- and downlink OFDMA with up to 16 resource units, multi-user MIMO (MU-MIMO), 4x4 MIMO with up to four spatial streams in 5GHz and 2x2 with up to two special streams in 2.4GHz, channel bandwidths up to 160MHz (5GHz; 40MHz in 2.4GHz), and 1024-QAM modulation.
The 510 series supports maximum data rates of 4.8Gbps in the 5GHz band and 575Mbps in the 2.4GHz band (for an aggregate peak data rate of 5.4Gbps). Each AP supports up to 256 associated client devices per radio (typical recommended limit for active clients is 150), making the mid-range 802.11ax 510 series APs ideal for high density environments, such as schools, retail branches, hotels and enterprise offices.
In addition to 802.11ax standard capabilities, the 510 Series supports unique features like Aruba ClientMatch radio management and additional radios for location services and IoT applications. This delivers an unsurpassed user experience in today's all-wireless digital work environment and offers up to 4x higher capacity in a cost-effective manner.
HIGH EFFICIENCY
The Aruba 510 Series will efficiently and simultaneously serve multiple clients, increasing data rates for both individual devices and as an overall system. Two key features of 802.11ax are multi-user connectivity and enhanced efficiency using Orthogonal Frequency Division Multiple Access (OFDMA) and multi-user - multiple input multiple output (MU-MIMO).
Multi-user transmission with downlink and uplink OFDMA - OFDMA increases user data rates and also reduces latency, especially for large numbers of devices with short frames or low data-rate requirements, such as voice and IoT devices. By providing multi-user capabilities, a channel can be divided in the frequency domain, and multiple transmissions can be carried simultaneously. OFDMA is particularly effective in raising network efficiency and capacity where there are many devices, short frames, or low data-rate streams.
Multi user transmission with downlink multi-user MIMO - MU-MIMO is another multi-user capability, originally introduced in 802.11ac. This improves network capacity by allowing multiple devices to transmit simultaneously.
Energy efficiency - As higher performance 802.11ax access points will handle a greater number of devices and traffic, they will be driving the need for more power consumption. To offset these demands, Aruba NetInsight includes a feature called GreenAP which allows the 510 series access points to draw less power when it's not being used, such as evenings when the buildings are empty.
