Network & Communication

The HDMI HDBaseT + VGA, 3.5mm, and USB-B to A over Cat Extender Dual Gang Wall Plate Transmitter to Box Receiver - 4K 60Hz allows a 4K HDMI source to be extended up to 130ft to a 4K display using a single Cat6a Ethernet cable. This is an ideal solution where USB must be extended alongside HDMI video and audio to interactive whiteboards and displays in conference rooms, classrooms, lecture halls, and many other installation needs that are far beyond the length limitations of standard HDMI cabling.

The transmitter extends HDMI, VGA, Stereo Audio, and high speed USB 2.0 signals over a single Cat5e, Cat6 or Cat6a network patch cable. Extend 4K HDMI up to 115 feet and 1080p VGA up to 230 feet using a Cat5e or Cat6 cable. For longer 4K distances, extend 4K HDMI up to 130 feet using a Cat6a cable.

This HDMI HDBaseT Extender is HDCP 2.2 compliant, making sure that the connection between the source and display is secure. Automatic switching is supported by the transmitter, connecting to the last active source. One-way analog audio pass through is supported from the transmitter to the receiver. High-speed USB 2.0 pass through is supported over HDBaseT up to 230ft for KVM control of devices such as USB cameras, keyboards, mice, etc. With PoH support, the receiver can send power to the wall plate transmitter, so no additional power adapter is required, allowing for greater flexibility in installations. Support this HDBaseT system that is already deployed in the field by upgrading firmware through the Micro-USB port on front panel of the wall plate transmitter, and upgrade the firmware through the RS232 port on rear panel of the receiver.

The HDMI over Cat Extender Box Transmitter to Box Receiver - 4K 60Hz allows a 4K HDMI source to be extended up to 131ft to a 4K display using a single Cat6/6a Ethernet cable. This is an ideal solution where HDMI video and audio in conference rooms, classrooms, lecture halls, and many other installation needs are far beyond the length limitations of standard HDMI cabling.

This HDMI over Cat Extender is HDCP 2.2 compliant, making sure that the connection from the source is secure. Multi-channel audio formats are supported, including PCM 7.1, Dolby TrueHD and DTS-HD Master Audio. With bi-directional Power over Cable (PoC) support, one power adapter at either transmitter or receiver side can power both units, so no additional power adapter is required, allowing for greater flexibility in installations.

Note: Ensure a solid, reliable connection between the 4K HDMI Extender and critical equipment. We suggest using HDMI Cables with gripping connectors that provide greater port retention than standard HDMI connectors.

The ultimate controller for high definition and progressive scan video sources, this selector routes any of three source devices to each TV/monitor or one source to five TV/monitors. Connect all your HDTV products including DVD players, satellite receivers, cable set-top boxes, or gaming systems, and use the remote control or front panel buttons to watch any picture on any five plasma, CRT, LCD or projection televisions with complete independence!

This matrix switch offers three component video inputs, three stereo audio inputs, and three optical digital audio TOSLINK inputs. It will switch all these inputs to any of five outputs, with the audio following video. The matrix switch also comes with an infrared remote control that features discrete commands to make programming complex macros into your universal remote control system a snap. Compatible with all interlaced or progressive scan analog component video signals. Now you can take control of your system and watch what you want where you want, and do it with no compromises!

The 10G-MM-DX-LC 10 Gb SFP+ Module MMF DX LC is designed for use with Luxul Ethernet switches that have an SFP+ port. This Small Form-Factor Pluggable+ (SFP+) module operates at 850nm wavelength in Duplex (DX) mode to provide 10 Gigabit connectivity at distances up to 300 meters when using OM3 Multi-Mode (MM) fiber optic cable. The module can be used in the SFP+ slot of any compatible Luxul switch. It is provided particularly for connecting Luxul managed switches that have 10 Gigabit uplink/stacking ports.

WHAT THIS PRODUCT DOES:

These Luxul modules are designed for use with Luxul Ethernet switches that have a corresponding SFP or SFP+ port. The modules can be used to interconnect Luxul switches or provide an additional port for connectivity to a networked device (computer, etc.). The modules allow for connectivity over various media, bandwidths, and distances: UTP copper or fiber optic cabling, short or long distances, 1 or 10 Gigabit.