USB/Firewire Adapters

The Plugable USB3-HUB3ME is an easy way to gain wired gigabit Ethernet network speeds for faster HD video streaming, gaming, web browsing, network storage and more. In addition, provides the ability to connect up to three USB devices to a single port on any capable computer via included USB 3.0 or USB C cable for greatest compatibility with many host systems.

Attractive black aluminum in a compact design with one green LED for diagnosing USB connectivity and a set of LEDs on the Ethernet port for link confirmation and activity. Add wired gigabit Ethernet to MacBooks, Microsoft Surface Pro series, Dell XPS, Chromebooks, Ultrabooks, or notebooks with no Ethernet connection, or replacing or upgrading network adapters in desktop PCs.

Compatibility

Uses Realtek RTL8153 and VIA VL817 chipsets for fast network speeds and maximum compatibility with almost all USB 3.0 hosts. Supports Microsoft Windows 11, 10 (RT not supported) through 7, macOS 10.6 and later, Chrome OS, and Linux kernels 3.9+. Full compatibility with USB C, 3.0, 2.0, and 1.1 hosts and devices. Not compatible with Android, Tivo, Nintendo Switch, or other non-PC/Mac platforms.

Supports 4K Jumbo Frames, IPv4/IPv6 checksum offload engine, crossover detection and auto-correction, TCP large send offload and IEEE 802.3az Energy Efficient Ethernet. Not recommended for use with older Texas Instruments, Fresco Logic, Etron, or Wistron USB 3.0 host controllers. Ethernet may require additional installation.

Ethernet Driver

Microsoft signed 32/64-bit drivers for Windows 11, 10, 8/8.1, and 7, macOS 10.6 and later, Linux kernels 3.9 and later include driver.

In The Box

Gigabit Ethernet Adapter (female RJ45 jack) with 3 Port USB 3.0 Bus powered Hub, two detachable 50cm cables: 1 USB B to C and 1 USB B to 3.0 / A, Quick Start Guide.

More from the Manufacturer

Connect up to seven USB 3.0, 2.0, or 1.1 devices to a single port on any computer. Fully plug and play, devices can be hot-swapped, supports USB over-current protection. Professional matte black with per-port blue LEDs.

Compatibility

Featuring the VIA VL813 USB 3.0 hub chipset updated to firmware version 9015 for maximum compatibility with almost all USB 3.0 hosts. Supports Microsoft Windows 11 through XP, Mac OS X, and Linux kernels 3.0 and later. Apple SuperDrive not compatible. Older Mac Pros with USB 3.0 PCI Express add-on cards may not work with this or any USB 3.0 hub. Full forward and backward compatibility between USB 3.0, 2.0, and 1.1 hosts and devices. Not recommended for use with older TI, Fresco Logic, Etron, or Wistron USB 3.0 host controllers. Requires no driver installation (although individual devices may require drivers). 2.4Ghz wireless devices such as keyboard/mouse receivers, Bluetooth and WiFi adapters, may not work in close proximity to USB 3.0 devices or hubs.

Power Abilities

Comes with a premium 12V 3A 36W UL certified power supply.

More from the Manufacturer

Share Your Device(s) With Simplicity

The Plugable USB 3.0 Sharing Switch (USB3-SWITCH2) is the ideal solution for one-touch switching of access between two computers to a:

• Powered USB 3.0 hub
• USB keyboard/mouse
• USB 3.0 graphics adapter
• USB 3.0 docking station
• Virtually any other USB 3.0/2.0/1.0 device

Features

One-Touch Switching

A single button press is all that's required to toggle between connected computers. Blue LED indicator lights show which connected computer has control.

Potential To Do More

Looking to provide two-computer access to a single keyboard, mouse, and display? Just attach the switch to a powered USB hub, then connect all your desired peripherals for an all-USB KVM solution.

Just Plug In And Switch Away

Switch works with any USB-enabled computer without drivers. Attached external devices will still require drivers as usual.

In The Box

• 1x Plugable USB 3.0 Sharing Switch
• 2x USB-A to USB-B Cables (1.5m/4.9ft)

System Compatibility

• Windows 10, 8.x, 7, Vista, and XP
• macOS
• Linux

Important Notes

• Not recommended for switching mass storage devices such as hard drives, flash drives, card readers, etc, as these devices should be unmounted or safely ejected via the host operating system prior to switching.
• Drivers are still required for the connected USB devices.

Additional Features

• The switch is backward compatible with USB 2.0/1.0 devices
• Simple passive USB switch means no power adapter is needed (bus-powered).

Incompatible Setups and Features

• Autosensing of hosts is not supported; manual press of the button is required.
• USB-C devices with video output are not supported.
• The use of USB-A to USB-B cables greater than 6ft/1.8m is not supported.

More from the Manufacturer

Experience the full power of USB4 with the Plugable USB4 and Thunderbolt 4 Hub (USB4-HUB3A) with 60W Host Charging. The Plugable Thunderbolt 4 and USB4 Hub is the only device of its kind to be certified as Engineered for EVO by Intel. The USB4-HUB3A stands out for its complement of features, including up to 60W charging for the host laptop, 3x USB4 / Thunderbolt 4 ports-each capable of up to 40Gbps, and up to 15W charging for your connected peripherals. And, despite the hub's compact size, there is also a USB-A port (10Gbps) for a legacy device. Drive dual 4K monitors or a single 8K monitor with Thunderbolt 4. Take advantage of the included USB-C to HDMI adapter for a convenient HDMI connection right out of the box.
Fast and Reliable Wins the Race
Built around a Goshen Ridge chipset from Intel, the USB4-HUB3A gives you access to everything USB4 has to offer. That means high speed-each port is capable of data transfer speeds up to 40Gbps, the maximum rate available through a USB port. But data isn't the only thing flowing through these ports. Thanks to intelligent power handling, you'll also get up to 15W of charging power for your connected devices, evenly distributed across the ports to ensure a balanced load. And because this USB4 dock ships with the latest certified firmware from Intel, you can count on smooth operation.
USB4 and More
Because the USB 4 hub is Thunderbolt certified and built around a Goshen Ridge chipset, your USB-C, Thunderbolt 3, Thunderbolt 4, and USB4 devices are supported, too. And don't worry if you're not sure what your system supports. The USB4-HUB3A will detect your computer's capabilities and adjust accordingly.
The Beauty of 8K Is on Display
Don't limit yourself to the confines of a little laptop screen. With this multiport hub, connect up to two 4K 60Hz displays or one 8K 30Hz display to a USB4 or Thunderbolt 4 PC or a Thunderbolt 3 or USB4 Mac. It even comes with a USB-C to HDMI 2.0 adapter to make connecting that second screen all the easier. It's worth noting that external display support is dependent on host computer's capabilities.

More from the Manufacturer

This USB hub powered by a robust 60W UL certified AC adapter, can be used as a stand-alone charging hub. Or take advantage of the included Hybrid 2-IN-1 cord and use it as a usb data hub.

Compatibility

This stackable usb port hub is designed to work with virtually every Windows, macOS, or Linux system. And, because you can use it as either a usb-c hub, or a usb hub 3.0, you'll enjoy forward and backward compatibility between USB-C, 3.0, 2.0, and 1.1 hosts and devices. On legacy systems, the latest drivers and updates should be installed to ensure compatibility.

Other Common Uses

At home it's a USB hub for laptops or a community charging spot for phones and tablets. At school, stack several to easily charge and sync student devices. In big operations, deploy as many hubs as you need to test and charge at high volume.

More from the Manufacturer