I/O & Storage Controllers

SIIG's 2-Port RS232 Serial Mini PCIe with Power provides two high-speed 16950 UART (9-pin) RS232 serial ports that support up to 460 Kb/s with deep 128-byte FIFO per transmitter and receiver. It can be installed in any available Mini PCI Express slot to allow additional serial port device connections.

The 2-Port RS232 Serial Mini PCIe with Power is compliant with PCI Express Base Specification, FCC & CE regulatory approved and RoHS-compliant. It is also fully compatible with a wide variety of Windows operating systems and backed by SIIG's limited 2-year warranty.

Adds one RS-232 serial port and one parallel port to a PCI Express enabled system

Adds two RS-232 serial ports and one parallel port to a PCI Express enabled system

Add one 16650 RS232 port to your PCI Express system

• Adds one 9-pin RS-232 serial port to PCIe enabled desktop computers
• One 16C650 UART serial port supports data transfer rate up to 250Kbps
• Compliant with PCI Express 2.0 Gen 1
• Single-lane (x1) PCI Express End-point Controller with PHY integrated
• Full serial modem control with hardware and software flow control
• Supports 5, 6, 7, 8 and 9-bit serial formats
• Supports Even, Odd, None, Space and Mark parity
• Supports on chip 256-byte FIFO buffers in transmit and receive path
• Works as either standard RS-232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays and many more). Configurable via jumpers
• Supports PCI Bus Power Management Interface Specification Revision 1.2
• Dual profile design installs into both full-size and low-profile system chassis with the included mounting brackets
• Installs into any PCI Express slot of any lane width
• Perfect solution to connect with POS system, industrial testing and control device, security system, logistic management equipment, printers, scanners, etc

Add two 16650 RS232 ports to your PCI Express system

• Adds two 9-pin RS-232 serial ports to PCIe enabled desktop computers
• Two 16C650 UART serial ports support data transfer rate up to 250Kbps
• Compliant with PCI Express 2.0 Gen 1
• Single-lane (x1) PCI Express End-point Controller with PHY integrated
• Full serial modem control with hardware and software flow control
• Supports 5, 6, 7, 8 and 9-bit serial formats
• Supports Even, Odd, None, Space and Mark parity
• On chip 256-byte FIFO buffers in transmit and receive path for each serial port
• Works as either standard RS-232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays and many more). Configurable via jumpers
• Supports PCI Bus Power Management Interface Specification Revision 1.2
• Dual profile design installs into both full-size and low-profile system chassis with the included mounting brackets
• Installs into any PCI Express slot of any lane width
• Perfect solution to connect with POS system, industrial testing and control device, security system, logistic management equipment, printers, scanners, etc