I/O & Storage Controllers

Supports 8 port 6Gb/s SATA III interface,Supports Port Multiplier,Supports Hot-Plug,Supports drive power control and staggered spin-up.Supports SATA Partial / Slumber power management state.

ASM1064, a SATA host controller(AHCI) with upstream PCIe Gen3 x1 and downstream four SATA Gen3 ports. It's a low latency, low cost and low power AHCI controller. With four SATA ports and cascaded port multipliers, ASM1064 can enable users to build up various high speed IO systems, including server, high capacity system storage or surveillance platforms.

The IO Crest full height MiniPCIE to SATA III 2 ports card (SI-MPE40160 ) is the easiest way to update any computer with SATA ports with a free M.2 A+E Key 2230 mm slot. Once installed, this host card will add SATA ports with two independent channels. This allows support of two SATA devices at speeds of up to 6Gb/s whether it is a SATA hard drive or SATA device.

Using the JMB582 chipset, theSI-MPE40160 can provide a maxium sequencial Read / Write Speed of 850 MB/s to 2 SATA 6Gb/s ports. For the storage solution based on data transfer of multiple hard drives, the newly added FIS-based switching design can overcome the bottlenecks created by operating multiple SATA storage devices simultaneously.

This half size 2 port Mini PCI-Express to SATA III Controller Cards allows you to add 2 SATAIII connections to a small form factor system. This is a great way to upgrade or expand the capabilities of your current system. This controllers is compatible with Serial ATA devices. This controller can utilize built in RAID support for RAID 0, 1, & Span.

Using the JMB585 chipset, the SI-ADA40141 can provide M.2 (PCIe Gen3 x2 bandwidth) to 5 Port SATA 6Gb / s card solution. For the storage solution based on data transfer of multiple hard drives, the newly added FIS-based switching design can overcome the bottlenecks created by operating multiple SATA storage devices simultaneously. The data transmission rate of the JMB585 can achieve to 1700MB/s, which is the maximum transfer speed of PCIe Gen3 x2.

This is a new M.2 SSD adapter card. It can be connected to use M.2 (NGFF) SSD to standard SATA interface. This card can be used for data transmission of storage devices and, it supports system boot. Installation is easy, and no driver is required!