Information Technology

The future is unstoppable, your Wi-Fi should be too.

Wi-Fi 6 brings next-generation Wi-Fi technology into your home, giving the quantum leap in capacity, speed and range you need to handle all your Wi-Fi demands. Perfect for high-performance, device-dense smart homes.

Exceptional Capacity

Connect more devices at faster speeds

Made for Smart Home

Better performance in device-dense environments

Next-Gen Speed and Range

Combined speeds up to AX5400

Unprecedented Efficiency

Higher throughput, more efficient transmission

Why You Want It

Next-Generation Speeds

The latest Wi-Fi 6 technology for blazing-fast Wi-Fi

OFDMA

Increased efficiency and lower latency for small data packets

MU-MIMO

Data to and from more devices at once

Extended Coverage

Signals reach further throughout your home

Supports WPA3™ Encryption

The latest Wi-Fi security for more protection

BSS Coloring

Color codes your data to minimize signal interference from your neighbors' Wi-Fi

Test Internet Speed

Built-in internet test powered by Ookla® to check your connection uplink and downlink speeds

Voice Control

Works with the Google Assistant and Alexa

Next-Generation Speeds

Experience up to AX4800 speeds while 1024-QAM boosts throughput to devices by up to 25% and 160 MHz contiguous channel width gives even more bandwidth. Up to 6 simultaneous streams let you enjoy faster, more enjoyable 4K streaming, online gaming and more, and should you require them - 4 Gigabit LAN ports and 1 Gigabit WAN port give you faster wired connectivity whenever you wish.

Connect More, Congest Less with OFDMA

The DIR-X4860 uses Wi-Fi 6's cutting-edge Orthogonal Frequency Division Multiple Access (OFDMA) technology. Small data packets destined for multiple devices are transmitted together and never have to queue up again. Perfect for Smart Homes filled with bandwidth-hungry IoT devices battling for bandwidth.

MU-MIMO

MU-MIMO technology helps distribute the flow of data to multiple devices simultaneously. With Wi-Fi 6 technology the DIR-X4860 leverages OFDMA and MU-MIMO for better efficiency of upstream AND downstream transmissions, unlike previous Wi-Fi 5 technology where MU-MIMO could only operate in downstream transmissions. This combination greatly increases capacity, coverage and performance especially in ultra-high-density environments.

Extended Coverage, Reduced Interference

High-gain antennas, built-in power amplifiers and beamforming technology allow the DIR-X4860 to extend the reach of your Wi-Fi and focus a stronger signal in the direction of your devices to ensure a stronger, faster and more reliable Wi-Fi experience. Meanwhile a long OFDM symbol ensures even greater Wi-Fi range, especially outside the home.

The Future of Wireless Encryption

One of the biggest concerns with Wi-Fi networks and connected devices is privacy. The latest 128-bit encryption is the most advanced standard available and begins a new era of wireless encryption, providing greater privacy throughout users' networks and devices.

The Future of Wireless Encryption

One of the biggest concerns with Wi-Fi networks and connected devices is privacy. The latest 128-bit encryption is the most advanced standard available and begins a new era of wireless encryption, providing greater privacy throughout users' networks and devices.

Wireless Managed Controller for D-Link's Nuclias Connect Solution for Small to Medium-Sized Business (SMB) networks.

Key solution features

• Versatile and Cost-Effective Hardware Controller
• Backwards-Compatibility with Legacy APs
• Intuitive Interface
• Traffic Reporting & Analytics
• Multi-Tenant & Role-Based Administration
• Searchable & Auditable Event & Change Logs
• Customizable Captive Portal
• Single Sign-On
• Payment Gateway Integration and Front-Desk Ticket Management

A Refreshing Take on Network Management

The D-Link DNH-100 Wireless Controller is a centralized wireless LAN manager developed specifically for our Nuclias Connect management solution and is suitable for small to medium-sized business (SMB) IT infrastructure. It comes preloaded with Nuclias Connect network management software, which is a key asset for businesses where IT skills are limited by financial or other constraints.

Tasks can be centralized and automated, meaning the DNH-100 is highly suited for remote deployment where either dedicated onsite staff are unavailable, or servers, PCs and other devices that can run the software might not be viable.

Better-Than-Expected Performance at a Smaller-Than-Expected Price

The DNH-100 is unbeatable value for money, delivering real value at a lower-than-expected price. Its backwards compatibility with a variety of legacy AP's means no need to unnecessarily replace older but still functioning hardware, better for your wallet and the planet.

With the ability to support up to 100 APs and a variety of business tools including Captive Portal, Payment Gateway Integration and Front Desk Ticket Management. Accordingly, all these top-notch capabilities can all be centralized thanks to the Nuclias Connect management software to reduce admin cost and fulfil most of SMBs networking and day-to-day demands.

Big Things Come in Small Packages

Despite its modest size, the DNH-100 offers the same Nuclias Connect management functionality of a larger device.
With a 1000Base-T Ethernet port, a USB 3.0 port, a Micro SD slot as well as support for IEEE 802.3ab/u/x, it's fully equipped for all occasions. Furthermore, manage up to 100 APs at one time, create and configure AP profiles, multiple SSID settings, access control, VLANs, time-based rules, bandwidth and performance. Control ranges from all-encompassing down to a single AP, so that fine-tuning your network via the connect software is effortlessly simple.

A Network That Can Look Out for Itself

The DNH-100 features self-organizing and self-optimizing capabilities such as interval-based radio scanning and analysis, self-management of radio frequency, as well as L2/L3 AP discovery and output power. Combined with other self-healing capabilities, it can maintain stability and continue operating at optimal levels even during peak usage times, so you can rest assured users are getting the best service possible.

An End to an Endless Number of Accounts

Nuclias Connect enables an extensive understanding of your network and its users through traffic analytics and status reports, which can be viewed at a glance. Insights derived from this data provide actionable intelligence which businesses can use to create business value. Traffic can be viewed across the entire network, down to the level of a single AP. Capacity and growth can be evaluated, as well as any irregularities that may arise, allowing for easier troubleshooting.

D-Link's DXS-1210 series 10 Gigabit Ethernet Smart Switches are cost effective 10 GbE switches capable of servicing a range of network needs in any business. Supporting 10GBASE-T/ SFP+ combo ports, they provide connection flexibility across a network allowing easier network integration. With high performance and low latency, these switches can fulfill the needs for virtualization, cloud services and server-to-server applications, making it perfect for SMB customers.

DXS-1210 series switches offer 10GbE copper and fiber ports. The 10GBASE-T copper ports utilize RJ45 interfaces and support 10 Gigabit speeds over CAT6a/CAT7 LAN cabling up to 100m. The 10GbE fiber ports can be connected to other 10GbE ports with low cost Direct Attach Copper (DAC) cables, or with SFP+ optical transceivers over multimode or singlemode fiber optic cabling.

Energy Saving

Incorporating D-Link Green technology, the switches are capable of power-saving without sacrificing operational performance or functionality. They feature built-in smart fans; internal heat sensors monitor and detect temperature changes, and react accordingly by utilizing different fan speeds for different temperatures. At lower temperatures, the fans will run slower, reducing the switch's power consumption and noise. Link status drastically reduces power consumption by automatically toggling ports without a link to sleep mode. DXS-1210 switches take the approach to green IT one step further by incorporating a special chipset with advanced silicon technology for efficient use of energy.

Extensive Management and Layer 2 Features

Equipped with a complete lineup of L2 features, DXS-1210 switches include port mirroring, Spanning Tree Protocol and Link Aggregation Control Protocol (LACP). Network maintenance features include loopback detection and cable diagnostics. Loopback detection is used to detect loops created by a specific port and automatically shut down the affected port. The cable diagnostic feature, designed primarily for administrators and customer service representatives, can rapidly discover errors and determine the cable quality, allowing the switch to manage itself for you.

QoS, Bandwidth Control

DXS-1210 switches support Auto Surveillance VLAN (ASV), and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN technology consolidates data and surveillance video transmission through a single unit, thus sparing businesses the expense of dedicated hardware and facilities. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. Auto Voice VLAN technology enhances the VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority and individual VLAN, these features guarantee the quality and security of VoIP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with bandwidth control, network administrators can reserve bandwidth for important functions that require a larger bandwidth or might have high priority.

10-Gigabit Smart Managed switches with optional auto-detection to eliminate surveillance and VoIP latency, and optional SFP+ or SFP28 ports for 10G/25G expandable network, designed for scalability

• Range of copper and fiber port combinations for deployment flexibility
• Effortlessly eliminate surveillance and VoIP latency (select models only)
• Layer 2 management and security, with Layer 3 Lite features
• Up to 32K MAC address table size to connect more clients
• Cable Diagnostics & Loopback Detection streamlines network operation

The D-Link DXS-1210 Series conveniently offers a range of 10-Gigabit copper and fiber port combinations to cost-effectively alleviate network congestion. Select models are equipped with SFP+ or SFP28 ports for 10G/25G expandable network designed for scalability and can auto-detect surveillance and voice data to ensure uninterrupted video footage and jitter-free VoIP calls.

10-Gigabit Ports

10G connections for low latency and high bandwidth environments

10G/ 25G SFP28 Ports

10G/25G expandable network designed for scalability (DXS-1210-28T only)

User Friendly Web GUI

Multi-language Web GUI makes management easy for global deployments

Energy Saving Technology

By incorporating D-Link Green technology, this series of switches is capable of saving power without sacrificing operational performance or functionality.

Layer 2 Features

Includes port mirroring, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP)

Layer 3 Lite Features

Such as IP interfaces, ARP, IPv6 Neighbor Discovery (ND), Default Routing and Static Routing

Quality of Service

Automatically detects surveillance and VoIP data to ensure uninterrupted transmission (select models only)

Network Security

D-Link's innovative Safeguard Engine™ protects the network against traffic flooding caused by virus and worm infections

Alleviate Network Congestion

Add 10-Gigabit Ethernet connectivity with these affordable high-performance switches. Designed for deployment in small to medium-sized business (SMB) core networks and powerful enough for enterprise aggregation applications.

Simple & Cost-Effective Migration Up to 100G

The DXS-1210-28T model features 24 10GBase-T and four SFP28 fiber ports (10G/25G) to provide great scalability, highly efficient network and expandable capacity

Convenient Layer 2 & Layer 3 Lite Configurability

The DXS-1210 Series can be deployed as a Layer 2 aggregation switch with features such as port mirroring, STP, and LACP. When implemented as a Layer 3 Lite core switch, IP interfaces, ARP, IPv6 ND, Default Routing, and Static Routing can be applied for efficient routing applications.

An Added Line of Defense Against Attacks

The DXS-1210 Series defends your network with D-Link's innovative Safeguard Engine™ to neutralize threats such as malicious network flooding attacks, ARP spoofing, and bogus DHCP IP addressing. The DXS-1210 Series supports 802.1X port-based and host-based authentication, allowing the network to be authenticated through external RADIUS servers.

10-Gigabit Smart Managed switches with optional auto-detection to eliminate surveillance and VoIP latency, and optional SFP+ or SFP28 ports for 10G/25G expandable network, designed for scalability

• Range of copper and fiber port combinations for deployment flexibility
• Effortlessly eliminate surveillance and VoIP latency (select models only)
• Layer 2 management and security, with Layer 3 Lite features
• Up to 32K MAC address table size to connect more clients
• Cable Diagnostics & Loopback Detection streamlines network operation

The D-Link DXS-1210 Series conveniently offers a range of 10-Gigabit copper and fiber port combinations to cost-effectively alleviate network congestion. Select models are equipped with SFP+ or SFP28 ports for 10G/25G expandable network designed for scalability and can auto-detect surveillance and voice data to ensure uninterrupted video footage and jitter-free VoIP calls.

10-Gigabit Ports

10G connections for low latency and high bandwidth environments

10G/ 25G SFP28 Ports

10G/25G expandable network designed for scalability (DXS-1210-28T only)

User Friendly Web GUI

Multi-language Web GUI makes management easy for global deployments

Energy Saving Technology

By incorporating D-Link Green technology, this series of switches is capable of saving power without sacrificing operational performance or functionality.

Layer 2 Features

Includes port mirroring, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP)

Layer 3 Lite Features

Such as IP interfaces, ARP, IPv6 Neighbor Discovery (ND), Default Routing and Static Routing

Quality of Service

Automatically detects surveillance and VoIP data to ensure uninterrupted transmission (select models only)

Network Security

D-Link's innovative Safeguard Engine™ protects the network against traffic flooding caused by virus and worm infections

Alleviate Network Congestion

Add 10-Gigabit Ethernet connectivity with these affordable high-performance switches. Designed for deployment in small to medium-sized business (SMB) core networks and powerful enough for enterprise aggregation applications.

Simple & Cost-Effective Migration Up to 100G

The DXS-1210-28T model features 24 10GBase-T and four SFP28 fiber ports (10G/25G) to provide great scalability, highly efficient network and expandable capacity

Convenient Layer 2 & Layer 3 Lite Configurability

The DXS-1210 Series can be deployed as a Layer 2 aggregation switch with features such as port mirroring, STP, and LACP. When implemented as a Layer 3 Lite core switch, IP interfaces, ARP, IPv6 ND, Default Routing, and Static Routing can be applied for efficient routing applications.

An Added Line of Defense Against Attacks

The DXS-1210 Series defends your network with D-Link's innovative Safeguard Engine™ to neutralize threats such as malicious network flooding attacks, ARP spoofing, and bogus DHCP IP addressing. The DXS-1210 Series supports 802.1X port-based and host-based authentication, allowing the network to be authenticated through external RADIUS servers.