Component Speakers

Items 55 to 60 of 108 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 8
  2. 9
  3. 10
  4. 11
  5. 12
  • Electro-Voice Tour X TX1152 2-way Speaker - 500 W RMS - Black - 2000 W (PMPO) Woofer Tweeter Midrange - 8 Ohm

    The Electro-Voice TX1152 fits the bill when applications that require the low-frequency extension of a 15-inch woofer, with the outstanding pattern control of a larger, rotateable, 60 degree x 40 degree horn. Using the incredibly low-distortion, 15" woofer, the TX1152 boasts specs normally associated with loudspeakers twice the price.

    Learn More
    $714.24

  • Electro-Voice Tour X TX2152 2-way Speaker - 1000 W RMS - Black - 4000 W (PMPO) Woofer Tweeter Midrange - 4 Ohm

    The Electro-Voice TX2152 excels where all other dual, 15-inch loudspeakers fail - transient detail. The secret to the TX2152 is its combination of dual, low distortion woofers with an integrated analog crossover that uses elliptical filters to achieve 36 dB per octave slopes at the crossover frequency. The result is crossover performance that surpasses many electronic DSP devices and bi-amping.

    Learn More
    $1,165.09

  • Electro-Voice UW30 Flush Mount Speaker - 30 W RMS - Blue - 120 W (PMPO) Woofer Tweeter Midrange - 8 Ohm

    The UW30 underwater speaker is equipped with a waterproof, three-conductor, 50-foot cable. Built for installation in both fresh and salt water pools, the UW30 can even be safely installed in ocean environments. The speaker is designed for permanent installation and completely submerged operation. Problems such as corrosion and electrolysis damage are completely eliminated by plastic construction. The 12.7-ounce ceramic magnet and state-of-the-art voice-coil construction ensure high-fidelity response with low distortion throughout the power range.

    Learn More
    $338.14

  • Electro-Voice ZX1 2-way Pole Mount Speaker - 200 W RMS - Black - 800 W (PMPO) - 8" - 1.25" Titanium Tweeter - 48 Hz to 20 kHz - 8 Ohm

    Electro-Voice ZX1 2-way Pole Mount Speaker - 200 W RMS - Black - 800 W (PMPO) - 8" - 1.25" Titanium Tweeter - 48 Hz to 20 kHz - 8 Ohm Learn More
    $327.01

  • Bosch 2-way Outdoor Wall Mountable, Cabinet Mount Speaker - 90 W RMS - White - 360 W (PMPO) - 7.99" - 0.98" - 50 Hz to 20 kHz - 8 Ohm

    Two-way 8-inch cabinet loudspeaker, with easy wall-mount system, internal 60W 70/100-volt line transformer with 8 Ohm bypass, weather-resistant IP54 (packaged in pairs), white

    Learn More
    $515.21

  • Electro-Voice EVC-1122-95PIW 2-way Wall Mountable Speaker - 300 W RMS - White - 1200 W (PMPO) - 12" - 1.25" Titanium Dome Tweeter - 70 Hz to 22 kHz - 8 Ohm

    • 12-inch, two-way loudspeaker, with 90° x 55° constant directivity, rotatable waveguide
    • Power rating: 300 W Continuous, (1200 Peak)
    • Passive system: 95 dB, 126 dB maximum
    • Gland nut cover and stainless steel grille on PI versions
    • Optional high quality transformer and patented Automatic Saturation Control (ASC) preserve low end in 70V/100V lines
    EVC loudspeakers from Electro-Voice are two-way systems that can be used in a broad range of applications where wide bandwidth, vertical and horizontal directivity control, and high efficiency are required in a compact, cost-effective package. EVC loudspeakers are voiced to complement other EVInnovation models (EVF, EVH, EVA).
    The high frequency section of EVC loudspeakers comprises a single 1?-inch pure titanium dome compression driver directly coupled to a rotatable constant directivity waveguide that delivers uniform pattern control and smooth, linear response. The low frequency section employs a high-output woofer that was developed using state-of-the-art, computer aided optimization to provide low distortion, high efficiency, and maximum intelligibility at high sound pressure levels. The passive crossover implements a fourthorder Linkwitz Riley design with slopes of 24 dB per octave for smooth off axis response and improved definition through the critical vocal range.
    The EVC series is an extremely cost effective solution for many fixed-install applications. The enclosures are constructed of 15-mm plywood and finished with EVCoat for enhanced durability. The loudspeakers have been designed with multiple M10 rigging points as well as attachment points for an optional U-bracket or multi-mount style pan/tilt wall mount. All EVC series loudspeakers accept wire gauges up to 10 AWG. The input panel also accepts optional covers with NL4-type connectors or weatherized gland-nuts.
    For 70V/100V operation, the input panel has an internal landing pad for mounting EV's high-quality TK150 audio transformer. Adding a TK150 to the EVC input panel engages EV's patented Automatic Saturation Compensation (ASC), which preserves low frequency performance while presenting a stable load to the amplifier regardless of how many loudspeakers are connected in parallel. This results in transformer and non-transformer EVC loudspeakers that sound virtually identical.

    Learn More
    $1,195.13

Items 55 to 60 of 108 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 8
  2. 9
  3. 10
  4. 11
  5. 12