Antennas
-
HPE AP-ANT-1 Antenna - 2.4 GHz to 2.5 GHz, 4.9 GHz to 5.875 GHz - 5.8 dBi - Indoor, Wireless Access Point, Wireless Data NetworkDirect Mount - Omni-directional - RP-SMA Connector
The AP-ANT-1 is a high-performance, tri-band, omnidirectional, indoor antenna ideally designed for multifunction access points that require an omnidirectional coverage pattern for WLAN service delivery or air monitoring on both the 2.4 GHz and 5 GHz bands. AP-ANT-1 has an articulating mount, providing flexibility in deployment and direct connection to Aruba access points with an onboard RP-SMA connector. The AP-ANT-1 is the preferred choice for multi-purpose service deployment or wireless intrusion prevention (WIP). It is offered in two colors to match the colors of Aruba indoor access points: the AP-ANT-1B antenna in off-white, and the AP-ANT-1W antenna in white.
Learn More -
HPE Outdoor MIMO Antenna - 4.9 GHz to 6 GHz - 14 dBi - OutdoorPole/Wall - Directional - N-Type Connector
ANT-4x4-5314 is a multi polarized antenna with 30° H x 30° V beamwidths. This antenna is well suited for coverage along a street, spot coverage, or for covering a seating section in stadiums and other large public venues. It is also ideal for point-to-point connections. The narrower beamwidth reduces the zone where interference may be received.
Learn More -
HPE AP-ANT-22 Antenna - 2.4 GHz, 5 GHz - 4 dBi - Wireless Access Point, Radio CommunicationOmni-directional - RP-SMA Connector
HPE AP-ANT-22 Antenna - 2.4 GHz, 5 GHz - 4 dBi - Wireless Access Point, Radio CommunicationOmni-directional - RP-SMA Connector Learn More -
HPE Antenna - 13 dBiOmni-directional
HPE Antenna - 13 dBiOmni-directional Learn More -
HPE Antenna - Indoor, Cellular Network, Gateway
HPE Antenna - Indoor, Cellular Network, Gateway Learn More -
HPE AP-ANT-16 Indoor MIMO Antenna - 2.4 GHz to 2.5 GHz, 4.9 GHz to 5.9 GHz - 4.7 dBi - Indoor, Wireless Access Point, Wireless Data NetworkCeiling Mount - Omni-directional - RP-SMA Connector
AP-ANT-16 is a dual-band 3-element omni-directional antenna for use in 802.11n MIMO applications. Housed in a compact, low-profile PVC/Acrylic Radome, the antenna can be mounted to a variety of drop ceiling grids using the integrated spring clips. Each of the three MIMO antenna elements is connected to the Aruba Access Point via a low-loss, plenum-rated coax pigtail. The radiation patterns are uniform and symmetrical, providing high-level signal density into defined coverage zones. This antenna will greatly enhance the performance of 802.11n systems. The dual-band frequency coverage means that a single type of antenna can be deployed with any MIMO radio in the 2.4-2.5 and 4.9-5.9 GHz bands.
Learn More
As a multi-antenna array, the AP-ANT-16 can be used with a single AP-124 to provide full dual-band 802.11a/b/g/n MIMO coverage or the three elements can be used individually or in combination to provide diversity/non-diversity coverage with legacy 802.11a/b/g access points.
