Rack & Cabling

Designed for the RackSolutions Open Frame Rack Model 111, this Vertical Cable Management Bar is designed to handle large bundles of cables from the data center, networking, and telecommunications equipment mounted in a server rack. While the Rack Model 111 includes one 5 Inch Vertical Cable Management Bar, these are available in case you need a replacement or have additional cable management needs. The rack cable management bar comes integrated with cable passthrough holes routing cables from different directions. Cable tie-down slots are wide enough to allow for both zip ties and hook-and-loop Cinch Straps for securing cables as well as designed to hold up to 4 of our vertical rack PDUs with the help of a bracket (not included). There are a total of 8 mounting points within the Rack 111 for this vertical cable management bar, front/rear, right/left, and inside/outside. Because the Rack 111 is designed to be coupled together, each Vertical Cable Management Bar is shared with each adjacent rack. Both 5 Inch and 11 Inch depth options are available, depending on your cable density needs. Sizes include 24U through 70U for the 5 Inch depth cable management bars and 44U through 70U for the 11 Inch.

Designed for the RackSolutions Open Frame Rack Model 111, this Vertical Cable Management Bar is designed to handle large bundles of cables from the data center, networking, and telecommunications equipment mounted in a server rack. While the Rack Model 111 includes one 5 Inch Vertical Cable Management Bar, these are available in case you need a replacement or have additional cable management needs. The rack cable management bar comes integrated with cable passthrough holes routing cables from different directions. Cable tie-down slots are wide enough to allow for both zip ties and hook-and-loop Cinch Straps for securing cables as well as designed to hold up to 4 of our vertical rack PDUs with the help of a bracket (not included). There are a total of 8 mounting points within the Rack 111 for this vertical cable management bar, front/rear, right/left, and inside/outside. Because the Rack 111 is designed to be coupled together, each Vertical Cable Management Bar is shared with each adjacent rack. Both 5 Inch and 11 Inch depth options are available, depending on your cable density needs. Sizes include 24U through 70U for the 5 Inch depth cable management bars and 44U through 70U for the 11 Inch.

Cabling crossbars secure equipment with the use of hook and loop straps or zip ties. They are ideal for fiber optic cables, as it gives more space to bend them at an appropriate angle. They are typically used with equipment on static or non-sliding rails, but they can also be used on equipment with slide rails as long as the cables are disconnected from the equipment before the equipment is slid out, allowing it to serve as an alternative to a Cable Management Arm. Cabling crossbars are available in several different types, depending on the amount of cabling to be secured. The smaller cable crossbars work well with 1U servers and network switches.

The KoldLok Grommet product were developed to provide the best seal against this wasted airflow. Designed to seal openings in new raised floor cutouts prior to the installation of communications, power, or other cabling. HotLok® Round Rack Mount Grommet is designed to seal 4" (102mm) cable openings in new and existing server rack cutouts to block bypass airflow and maximize cooling system efficiency.

The cable management arm is compatible with most types of equipment. It is a fully adjustable, ruggedized solution. There are a number of ways to attach the cable management arm to different types of equipment. Some OEM cable management arms take up too much space in the rack. This cable management arm is very compact and will typically not have any type of obstruction issue caused by OEM cable management.