Rack & Cabling
-
Rack Solutions 1U Cobra 155-A Dry Slide Rail for Dell - For Server, Rack - 1U Rack Height - 4 Post - Galvanized Steel
The Dell PowerEdge R210 and R240 are known as "short depth servers" and we designed a rail to capitalize on that fact. Dry slide rails designed for full length servers typically have excess inner rail in the back. Since the R210 and R240 are shorter servers, the inner rails of this kit can be shortened so that they will fit within low depth racks.
Learn More
Unlike OEM Dell rails, these will work with square, round or threaded hole racks out of the box. It also can be converted between 2 post and 4 post and four post mounting orientations. The rail is made from 18 Ga galvanized steel for long lasting, high quality experience.$151.56 -
Rack Solutions 2U Secure Server Unit - For Server - 3U Rack Height - Rack-mountable - Black Powder Coat - TAA Compliant
The Secure Server Unit (SSU) from RackSolutions protects a server by locking it in the rack and preventing access to its ports, hard drives, etc. If you have a need to secure a single server within a shared rack, the SSU is the perfect solution. The Secure Server Unit is designed to help provide extra security for sensitive data or to be used as an alternative to a colocation cabinet. The unit includes a front and rear housing which both mount to the rack and are only accessible with a key. An included top, cross bar provides additional security for the server. The SSU is designed to accommodate two, 1U or one, 2U server and uses 3U of rack space.
Learn More$258.56 -
Rack Solutions 15Ux 600 mmx 600mm Swing Out Wall Mount Cabinet - For LAN Switch, Patch Panel - 15U Rack Height x 19" Rack Width - Wall Mountable
The Wall Mount Cabinet-Double Section 9U, 12U, 15U allows for easy mounting of switches, patch panels, and other rack equipment in a compact wall-mountable package. The rack provides a moderate amount of security for networking equipment without the space required for a full cabinet enclosure. These racks swing out from the wall while still be mounted to the wall.
Learn More$377.26 -
Rack Solutions KoldLok Integral Raised Floor Brush Insert - Grommet
The KoldLok Grommet product were developed to provide the best seal against this wasted airflow. Designed to seal openings in new raised floor cutouts prior to the installation of communications, power, or other cabling. HotLok® Round Rack Mount Grommet is designed to seal 4" (102mm) cable openings in new and existing server rack cutouts to block bypass airflow and maximize cooling system efficiency.
Learn More$120.48 -
Rack Solutions KoldLok Wave Raised Floor Insert - Grommet
The KoldLok Gromment product were developed to provide the best seal against this wasted airflow.Designed to seal openings in new raised floor cutouts prior to the installation of communications, power, or other cabling. HotLok® Round Rack Mount Grommet is designed to seal 4" (102mm) cable openings in new and existing server rack cutouts to block bypass airflow and maximize cooling system efficiency.
Learn More -
Rack Solutions 36U Vertical Cable Bar (5in) for 111 Open Frame Rack - Cable Organizer - 36U Rack Height
Designed for the RackSolutions Open Frame Rack Model 111, this Vertical Cable Management Bar is designed to handle large bundles of cables from the data center, networking, and telecommunications equipment mounted in a server rack. While the Rack Model 111 includes one 5 Inch Vertical Cable Management Bar, these are available in case you need a replacement or have additional cable management needs. The rack cable management bar comes integrated with cable passthrough holes routing cables from different directions. Cable tie-down slots are wide enough to allow for both zip ties and hook-and-loop Cinch Straps for securing cables as well as designed to hold up to 4 of our vertical rack PDUs with the help of a bracket (not included). There are a total of 8 mounting points within the Rack 111 for this vertical cable management bar, front/rear, right/left, and inside/outside. Because the Rack 111 is designed to be coupled together, each Vertical Cable Management Bar is shared with each adjacent rack. Both 5 Inch and 11 Inch depth options are available, depending on your cable density needs. Sizes include 24U through 70U for the 5 Inch depth cable management bars and 44U through 70U for the 11 Inch.
Learn More$124.13
