PC Fans/Heat Sinks

IMPROVED COOLING PERFORMANCE BY NEW PRODUCTION PROCESS

The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity.

WIDE RPM RANGE

The Alpine 23 features a new motor technology with a very wide, PWM-controlled RPM range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed.

LOWER POWER CONSUMPTION & MINIMUM VIBRATION

The new Alpine 23 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibration from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance.

HIGH QUALITY BEARING

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

EXTENDED LIFE SPAN

A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature.

PRE-APPLIED MX-2 THERMAL PASTE

The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation.

EASY AND TOOL-FREE INSTALLATION

Thanks to the mounting clips, the installation is really easy. Alpine 23 is simply plugged onto the existing AMD retention modules and screwed tight.

Top-Notch Price-Performance Ratio

Thanks to its radial heat sink and good fan design, the Alpine 12 CO offers a lot of performance at a very low price point. In internal tests leveled to 28 dB(A), the cooling performance of the Alpine 12 CO exceeded the competition, in some cases by more than 10°C.

Improved Cooling Performance by New Production Process

The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity.

Wide RPM Range

The Alpine 12 CO features a new motor technology with a very wide, PWM-controlled RPM range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed.

Lower Power Consumption & Minimum Vibration

The new Alpine 12 CO is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of vibrations from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance.

For Continuous Operation

The premium quality Japanese dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential.

Extended Life Span

A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its low coil temperature.

Pre-applied MX-2 Thermal Paste

The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation.

Easy and Tool-free Installation

Thanks to the push pins, the installation is really easy. Additional tools are not needed to install the cooler.

TOP-NOTCH PRICE-PERFORMANCE RATIO

Thanks to its radial heat sink and good fan design, the Alpine 12 LP offers a lot of performance at a very low price point. In internal tests leveled to 28 dB(A), the cooling performance of the Alpine 12 LP was on par with competition while offering a much smaller footprint at a more affordable price.

IMPROVED COOLING PERFORMANCE BY NEW PRODUCTION PROCESS

The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity.

WIDE RPM RANGE

The Alpine 12 LP features a new motor technology with a very wide, PWM-controlled RPM range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed.

LOWER POWER CONSUMPTION & MINIMUM VIBRATION

The new Alpine 12 LP is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of vibrations from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance.

LOW PROFILE DESIGN

With an installation height of only 42.2 mm, the Alpine 12 LP is particularly suitable for small and narrow housings. It is easy to assemble and allows full access to all components close to the CPU. The compact Top-Blower CPU cooler also cools areas around the CPU socket and is predestined for HTPC and Mini-ITX cases.

EXTENDED LIFE SPAN

A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature.

HIGH QUALITY BEARING

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

PRE-APPLIED MX-2 THERMAL PASTE

The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation.

EASY AND TOOL-FREE INSTALLATION

Thanks to the push pins, the installation is really easy. Additional tools are not needed to install the cooler.

Top-Notch Price-Performance Ratio

Thanks to its radial heat sink and good fan design, the Alpine 12 offers a lot of performance at a very low price point. In internal tests leveled to 28 dB(A), the cooling performance of the Alpine 12 exceeded the competition, in some cases by more than 10°C.

Improved Cooling Performance by New Production Process

The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity.

Wide RPM Range

The Alpine 12 features a new motor technology with a very wide, PWM-controlled RPM range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed.

Lower Power Consumption & Minimum Vibration

The new Alpine 12 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibrations from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance.

Extended Life Span

A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its low coil temperature.

High Quality Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

Pre-applied MX-2 Thermal Paste

The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation.

Easy and Tool-free Installation

Thanks to the push pins, the installation is really easy. Additional tools are not needed to install the cooler.