PC Fans/Heat Sinks

Addressable RGB for Full Colour Control

The P14 PWM PST A-RGB has 12 digital A-RGB LEDs in the center fan wheel. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.

0 dB Mode - Zero rpm

The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.

Maximum Smoothness, Minimum Vibration

The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P14 PWM PST A-RGB has rubberised contact surfaces and thus reduces audible vibrations to a minimum.

Optimised for High Static Pressure

The P14 PWM PST A-RGB operates with a focused airflow and a high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.

200 to 1900 rpm Controlled via PWM PST

With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P14 PWM PST A-RGB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance.

High Quality Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended.

Quality You Can Rely On

To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the P14 PWN PST A-RGB.

Learn More

EXCELLENT PRICE-PERFORMANCE RATIO

With two powerful, pressure-optimised BioniX P-fans and its updated, thermal-coated heatsink, the Freezer 34 eSports DUO offers a lot of performance for a fair price. In internal tests levelled to 28 dB(A), the Freezer 34 eSports DUO was able to surpass many competitors, even much bigger and more expensive double tower cooling solutions.

NEW P-FANS FOR INCREASED PERFORMANCE

The Freezer 34 eSports DUO benefits of all advantages of our new BioniX P-fans.

• High static pressure for increased cooling performance
• Extended RPM range
• Lower power consumption
• Fewer vibrations
• Extended life span
• High quality bearing
• PWM PST for synchronous fan control

Learn More

SMALL FOOTPRINT FOR OPTIMAL COMPATIBILLITY

The Freezer i13 X combines a compact advanced heat sink design with 3 direct touch heat pipes. In combination with the fan designed for static pressure, an optimal cooling performance is achieved despite the comparatively small dimensions. The Freezer i13 X has an installation height of only 137 mm and there are no limitations in RAM compatibility.

PRE-APPLIED MX-2 THERMAL PASTE

Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.

LONGER LIFESPAN THANKS TO ITS LOW MOTOR TEMPERATURE

The Freezer i13 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer i13 X.

OFFSET HEAT PIPES ENABLE OPTIMAL HEAT DISSIPATION

The direct touch heat pipes attached to the Freezer i13 X and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.

P-FAN FOR INCREASED PERFORMANCE

Inspired by the P-series, the Freezer i13 X's fan benefits from all of the advantages of P-fans:

• High static pressure for increased cooling performance
• Broad RPM range
• Lower power consumption
• Less vibration
• PWM for synchronous fan control

Learn More

• Compatible with Intel ® & AMD ® sockets
• Thermal coating and evenly spread heat pipes for optimal heat dissipation
• Push-Pull-Configuration for ideal airflow
• Broad RPM Range for highest performance and low noise level
• Focused airstream for improved cooling performance
• 0 dB mode: silent passive mode when PWM signal is below 5 %
• PWM Sharing Technology (PST) regulates fan speed synchronously
• Extended life span and less vibrations with new motor technology
• Secure hold with backplate
• MX-4 thermal paste included

The ARCTIC Freezer 34 eSports DUO is a Tower CPU cooler with two 120 mm BioniX P-series fans in push-pull configuration. It is a powerful cooling solution for AMD ® & Intel ® CPU and recommended for CPU with a TDP up to 210 W. The push.pull-configuration allows ideal airflow. The pressure-optimised fans create a focused airstream for increased performance. A broad RPM range enables highest performance as well as low noise levels. With high-quality bearings and a new motor-generation, the fans are very quiet, efficient and durable. It offers a 0 db mode, which switches the fans to a silent passive mode with the PWM signal below 5 %.

Excellent Price-Performance Ratio

With two powerful, pressure-optimised BioniX P-fans and its updated, thermal- coated heatsink, the Freezer 34 eSports DUO offers a lot of performance for a fair price. In internal tests levelled to 28 db(A), the Freezer 34 eSports DUO was able to surpass many competitors, even much bigger and more expensive double tower cooling colustions. More information about our performance test and the max. CPU temperatures for AMD & Intel can be found in our Cooler FAQ.

New P-fans for Increased Performance

The Freezer 34 eSports benefits of all advantages of our new BioniX P-fan.

• High static pressure for increased cooling performance
• 0 db fan mode below 5 % PWM
• Extended RPM range
• Lower power consumption
• Less vibrations
• Extended life span
• High quality bearing
• PWM PST for synchronous fan control

Improved Heat Dissipation

Evenly spread direct-touch heat pipes and an optimised heat sink design with 54 cooling fins lead to an ideal heat dissipation for the Freezer 34 eSports.

Ideal airflow

The two BioniX P-fans of the Freezer 34 eSports DUO work in push-pull-mode. The resulting increase of airflow ensures that more cold air is transported into the heatsink for cooling and the heat from the CPU is dissipated even faster from the heat sink. This ensures the best possible performance of the CPU.

Easy Installation & Secure Hold

Fast and easy to install and extremely reliable, the Freezer 34 eSports mounting system is compatible with Intel and AMD sockets. Thanks to a backplate and its low weight, the Freezer 34 eSports not only fool-proof to install, but also absolutely transport safe.

High Performance for High-End CPU

The contact surface of the Freezer 34 eSports heat pipes does not cover the full heatspreader, but, more importantly, is right where the processor DIE is and covers even the largest versions (18 core) completely.

MX-4 Thermal Paste included

The high-performance MX-4 thermal compound is included and ensures the best cooling results.

Thermal Coating

A thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation and to an increased cooling performance.

Learn More

RAM CLEARANCE

Since the Freezer 50 is built for maximum performance, including a massive heatsink, it does not have limitless RAM Clearance. Recommended is a maximum memory module height of 37.5 mm. This stipulation is mainly due to the tip on the underside of the Freezer 50, which means modules that exceed this height could still be compatible if they have V-shaped or centrally recessed heatsinks.

A-RGB FOR FULL COLOUR CONTROL

The 13 A-RGB LEDs installed in the Freezer 50 are autonomously controllable. The Freezer 50 is compatible with the common A-RGB standards of leading motherboard manufacturers for the simplest possible use. It can therefore be fully illuminated directly via the A-RGB mainboard connection or via an external controller and synchronized with the lighting of other hardware.

DUAL TOWER DESIGN AND 6 HEATPIPES

The massive, asymmetrical twin-tower CPU cooler offers more cooling surface and, together with its six U-shaped Direct-Touch Heatpipes, ensures better heat distribution and faster heat dissipation.
This enables the highest possible cooling performance and makes the Freezer 50 to one of the strongest air cooler ARCTIC ever made.

IDEAL AIRFLOW

The Freezer 50 features two P-fans working in push-pull-configuration. Combining a 120 mm and a 140 mm fan leads to an increase in airflow for improved cooling, while keeping the noise level and the installation height down.

P-FAN FOR INCREASED PERFORMANCE

The Freezer 50 benefits of all advantages of our P-fans:

• High static pressure for increased cooling performance
• Broad RPM range
• Lower power consumption
• Less vibrations
• Extended life span
• High quality bearing
• PWM for synchronous fan control

Learn More