PC Fans/Heat Sinks

RAM CLEARANCE

Since the Freezer 50 is built for maximum performance, including a massive heatsink, it does not have limitless RAM Clearance. Recommended is a maximum memory module height of 37.5 mm. This stipulation is mainly due to the tip on the underside of the Freezer 50, which means modules that exceed this height could still be compatible if they have V-shaped or centrally recessed heatsinks.

A-RGB FOR FULL COLOUR CONTROL

The 13 A-RGB LEDs installed in the Freezer 50 are autonomously controllable. The Freezer 50 is compatible with the common A-RGB standards of leading motherboard manufacturers for the simplest possible use. It can therefore be fully illuminated directly via the A-RGB mainboard connection or via an external controller and synchronized with the lighting of other hardware.

DUAL TOWER DESIGN AND 6 HEATPIPES

The massive, asymmetrical twin-tower CPU cooler offers more cooling surface and, together with its six U-shaped Direct-Touch Heatpipes, ensures better heat distribution and faster heat dissipation.
This enables the highest possible cooling performance and makes the Freezer 50 to one of the strongest air cooler ARCTIC ever made.

IDEAL AIRFLOW

The Freezer 50 features two P-fans working in push-pull-configuration. Combining a 120 mm and a 140 mm fan leads to an increase in airflow for improved cooling, while keeping the noise level and the installation height down.

P-FAN FOR INCREASED PERFORMANCE

The Freezer 50 benefits of all advantages of our P-fans:

• High static pressure for increased cooling performance
• Broad RPM range
• Lower power consumption
• Less vibrations
• Extended life span
• High quality bearing
• PWM for synchronous fan control

Learn More

SMALL FOOTPRINT FOR OPTIMAL COMPATIBILLITY

The Freezer i13 X combines a compact advanced heat sink design with 3 direct touch heat pipes. In combination with the fan designed for static pressure, an optimal cooling performance is achieved despite the comparatively small dimensions. The Freezer i13 X has an installation height of only 137 mm and there are no limitations in RAM compatibility.

PRE-APPLIED MX-2 THERMAL PASTE

Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.

LONGER LIFESPAN THANKS TO ITS LOW MOTOR TEMPERATURE

The Freezer i13 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer i13 X.

OFFSET HEAT PIPES ENABLE OPTIMAL HEAT DISSIPATION

The direct touch heat pipes attached to the Freezer i13 X and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.

P-FAN FOR INCREASED PERFORMANCE

Inspired by the P-series, the Freezer i13 X's fan benefits from all of the advantages of P-fans:

• High static pressure for increased cooling performance
• Broad RPM range
• Lower power consumption
• Less vibration
• PWM for synchronous fan control

Learn More

A worthy Freezer 7 Pro Successor: Better Price - Better Performance

The ARCTIC Freezer 7 X is a compact CPU cooler with one 92 mm fan. It is multi-compatible with common Intel® and AMD® sockets. It benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimised for high static pressure, ARCTIC has been able to significantly improve the cooling performance of Freezer 7 X.

Compatible with Intel & AMD Sockets

The Freezer 7 X is compatible with all current desktop sockets from Intel and AMD. By using the mounting frame, simple installation is possible without a need to remove the mainboard.

Pre-applied MX-2 Thermal Paste

Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.

Longer Lifespan Thanks to its Low Coil Temperature

The Freezer 7 X uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 °C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer 7 X.

Offset Heat Pipes Enable Optimal Heat Dissipation

The direct touch heat pipes attached to the Freezer 7 X and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.

More Efficient and Whisper Quiet

In addition to operating more quietly, even at maximum speed, the Freezer 7 X built-in fan motor is also much more efficient. The power consumption was reduced from 0.25 A to 0.07 A, which corresponds to an effective savings of 72 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer 7 X to run at a whisper-quiet 0.3 sone when at maximum speed.

10 % More Cooling Capacity with Freezer 7 X

The ARCTIC Freezer 7 X sets new standards in cooling. Compared to its predecessor, a performance increase of almost 10 % could be tested. The thermal resistance stands for the absolute performance of a CPU cooler by indicating the temperature increase per unit of performance. It also represents the cooling performance independent of the processor and is the more accurate alternative to a TDP specification.

P-fan for Increased Performance

Inspired by the P-series, the fan of the Freezer 7 X benefits from all of the advantages of P-fans:

• High static pressure for increased cooling performance
• Broad RPM range
• Lower power consumption
• Less vibration
• PWM for synchronous fan control

Fluid Dynamic Bearing

Thanks to a combination of alloy and lubricant developed in Germany, the friction within the bearing is reduced, leading to greater efficiency. In this way, less heat is generated, there is less bearing noise and the life of the fan is extended.

Direct Touch Heat Pipes

The Freezer 7 X uses direct touch heatpipes. This ensures that the heat to be dissipated is transferred directly to the heatpipes without an additional material layer, and transported into the heatsink via the pipes.

Multilingual Manuals

We offer a regularly updated user manual in many languages conveniently at your fingertips anywhere and anytime. Put the QR code sticker in an easy-to-reach place and never again waste time searching for product instructions.

Learn More

Future-Proof Compatibility

At the end of 2022, AMD released the AM5 socket, the successor to its popular AM4 platform. Because all mechanical dimensions remain identical, we can guarantee the compatibility of ARCTIC coolers with AMD's new processors.

Additionally, all coolers shipped by ARCTIC are already compatible with Intel's Alder Lake and Raptor Lake LGA1700 processors. Coolers purchased from resellers, however, may still have been shipped without the corresponding accessories. In this case, please contact our customer support.

Excellent Price-Performance Ratio

With two powerful, pressure-optimised BioniX P-fans and its updated, thermal-coated heatsink, the Freezer 34 eSports DUO offers a lot of performance for a fair price. In internal tests levelled to 28 dB(A), the Freezer 34 eSports DUO was able to surpass many competitors, even much bigger and more expensive double tower cooling solutions. More information about our performance test and the max. CPU temperatures for AMD & Intel can be found in our Cooler FAQ.

P-Fans for Increased Performance

The Freezer 34 eSports DUO benefits from all advantages of our new BioniX P-fans.

• High static pressure for increased cooling performance
• Extended rpm range
• Lower power consumption
• Fewer vibrations
• Extended life span
• High-Quality bearing
• PWM PST for synchronous fan control

For additional information about the P-fans, we recommend ourFAQ.

Better Performance - Maximum FPS

No thermal throttling on your CPU - even at high turbo clock speeds and overclocking, the Freezer 34 eSports DUO cools quietly, so you can reach the maximum FPS with minimal noise levels for the smoothest possible gaming experience.

Improved Heat Dissipation

Evenly spread direct-touch heat pipes and an optimised heat sink design with 54 cooling fins lead to ideal heat dissipation for the Freezer 34 eSports DUO.

Ideal Airflow

The two BioniX P-fans of the Freezer 34 eSports DUO work in push-pull-configuration The resulting increase of airflow ensures that more cold air is transported into the heatsink for cooling and the heat from the CPU is dissipated even faster from the heat sink. This ensures the best possible performance of the CPU.

High Performance for High-End CPU

The contact surface of the Freezer 34 eSports DUO heat pipes does not cover the full heat spreader, but, more importantly, is right where the processor DIE is and covers even the largest versions (18 core) completely.

MX-4 Thermal Paste Included

The high-performance MX-4 thermal compound is included and ensures the best cooling results.

Easy Installation & Secure Hold

Fast and easy to install and extremely reliable, the Freezer 34 eSports DUO mounting system is compatible with Intel and AMD sockets. Thanks to a backplate and its low weight, the Freezer 34 eSports DUO is not only foolproof to install but also absolutely transport safe.

Optimal RAM-Compatibility

Thanks to its compact dimensions of only 124 x 157 x 103 mm, there are almost no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues and are not blocked by the CPU Cooler.

Multilingual Manuals

We offer a regularly updated user manual in many languages conveniently at your fingertips anywhere and anytime. Put the QR code sticker somewhere convenient and never waste time again looking for product instructions.

Learn More

• Compatible with Intel ® & AMD ® sockets
• Thermal coating and evenly spread heat pipes for optimal heat dissipation
• Push-Pull-Configuration for ideal airflow
• Broad RPM Range for highest performance and low noise level
• Focused airstream for improved cooling performance
• 0 dB mode: silent passive mode when PWM signal is below 5 %
• PWM Sharing Technology (PST) regulates fan speed synchronously
• Extended life span and less vibrations with new motor technology
• Secure hold with backplate
• MX-4 thermal paste included

The ARCTIC Freezer 34 eSports DUO is a Tower CPU cooler with two 120 mm BioniX P-series fans in push-pull configuration. It is a powerful cooling solution for AMD ® & Intel ® CPU and recommended for CPU with a TDP up to 210 W. The push.pull-configuration allows ideal airflow. The pressure-optimised fans create a focused airstream for increased performance. A broad RPM range enables highest performance as well as low noise levels. With high-quality bearings and a new motor-generation, the fans are very quiet, efficient and durable. It offers a 0 db mode, which switches the fans to a silent passive mode with the PWM signal below 5 %.

Excellent Price-Performance Ratio

With two powerful, pressure-optimised BioniX P-fans and its updated, thermal- coated heatsink, the Freezer 34 eSports DUO offers a lot of performance for a fair price. In internal tests levelled to 28 db(A), the Freezer 34 eSports DUO was able to surpass many competitors, even much bigger and more expensive double tower cooling colustions. More information about our performance test and the max. CPU temperatures for AMD & Intel can be found in our Cooler FAQ.

New P-fans for Increased Performance

The Freezer 34 eSports benefits of all advantages of our new BioniX P-fan.

• High static pressure for increased cooling performance
• 0 db fan mode below 5 % PWM
• Extended RPM range
• Lower power consumption
• Less vibrations
• Extended life span
• High quality bearing
• PWM PST for synchronous fan control

Improved Heat Dissipation

Evenly spread direct-touch heat pipes and an optimised heat sink design with 54 cooling fins lead to an ideal heat dissipation for the Freezer 34 eSports.

Ideal airflow

The two BioniX P-fans of the Freezer 34 eSports DUO work in push-pull-mode. The resulting increase of airflow ensures that more cold air is transported into the heatsink for cooling and the heat from the CPU is dissipated even faster from the heat sink. This ensures the best possible performance of the CPU.

Easy Installation & Secure Hold

Fast and easy to install and extremely reliable, the Freezer 34 eSports mounting system is compatible with Intel and AMD sockets. Thanks to a backplate and its low weight, the Freezer 34 eSports not only fool-proof to install, but also absolutely transport safe.

High Performance for High-End CPU

The contact surface of the Freezer 34 eSports heat pipes does not cover the full heatspreader, but, more importantly, is right where the processor DIE is and covers even the largest versions (18 core) completely.

MX-4 Thermal Paste included

The high-performance MX-4 thermal compound is included and ensures the best cooling results.

Thermal Coating

A thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation and to an increased cooling performance.

Learn More