PC Fans/Heat Sinks

TH360 Snow Edition is an all-in-one 360mm liquid cooler that supports 5V RGB compatible motherboards.

TH360 ARGB Sync Snow Edition AIO Liquid Cooler

TH360 ARGB Sync Snow Edition is an all-in-one liquid cooler which includes three 120mm powerful high static pressure fans, and a high performance radiator along with a water block, 16.8M RGB color lumination with pre-set lighting modes via the smart fan controller, or synchronize with motherboard RGB software for stunning RGB colors.

Tt LCS Certified

Tt LCS Certified is a Thermaltake exclusive certification applied only to products that pass the design and hardcore enthusiast standards. The Tt LCS certification is to ensure you will get the best performance from the best features and fitment.

Smart Fan Controller

The ARGB controller allows users to switch LED modes, LED colors, and lighting speeds when using a motherboard without a 5V addressable RGB header. Users can switch between flow, ripple, pulse, blink, wave, full light, RGB spectrum, and off modes with various colors and LED speed options.

120mm ARGB Radiator Fan

High-static pressure fan design delivers impressive cooling performance.

High Efficiency Radiator

Specially designed 120mm large surface radiator increases surface delivering exceptional heat dissipation.

High Performance Waterblock

The high performance copper base plate accelerates heat conductivity.

Highly Reliable Pump

The high quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore no refill is either needed or required.

Simple Setup

Featuring superb cooling performance, the TH120 ARGB Sync provides an easy installation and maintenance-free operation, requiring only the minimum amount of space in the chassis.

TH360 Snow Edition is an all-in-one 360mm liquid cooler that supports 5V RGB compatible motherboards.

TH360 ARGB Sync Snow Edition AIO Liquid Cooler

TH360 ARGB Sync Snow Edition is an all-in-one liquid cooler which includes three 120mm powerful high static pressure fans, and a high performance radiator along with a water block, 16.8M RGB color lumination with pre-set lighting modes via the smart fan controller, or synchronize with motherboard RGB software for stunning RGB colors.

• Aura Addressable Header
• Digital Pin Header
• JRAINBOW Header
• Addressable RGB LED Header
• Addressable RGB LED Header

Tt LCS Certified

Tt LCS Certified is a Thermaltake exclusive certification applied only to products that pass the design and hardcore enthusiast standards. The Tt LCS certification is to ensure you will get the best performance from the best features and fitment.

Smart Fan Controller

The ARGB controller allows users to switch LED modes, LED colors, and lighting speeds when using a motherboard without a 5V addressable RGB header. Users can switch between flow, ripple, pulse, blink, wave, full light, RGB spectrum, and off modes with various colors and LED speed options.

Tripple 120mm ARGB Radiator Fan

High-static pressure fan design delivers impressive cooling performance.

High Efficiency Radiator

Specially designed 360mm large surface radiator increases surface delivering exceptional heat dissipation.

High Performance Waterblock

The high performance copper base plate accelerates heat conductivity.

High Reliability Pump

The high quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore no refill is required.

Simple Setup

Featuring superb cooling performance, the TH360 Snow Edition provides an easy installation and maintenance-free operation, requiring only the minimum amount of space in the chassis.

More from the Manufacturer

An RGB designed waterblock for ASUS ROG STRIX RTX 3080 and 3090 graphic card that supports the TT RGB PLUS software, which not only cools down your GPU but brings out the best visual effects on your build.

Pacific V-RTX 3080/3090 Plus (ASUS ROG) GPU Waterblock

The Thermaltake Pacific V-RTX 3080/3090 Plus (ASUS ROG) GPU Waterblock is a transparent waterblock designed for the latest ASUS ROG STRIX RTX 3080/3090 graphic cards. It supports TT RGB PLUS software and displays 16.8M RGB lighting effects that help your GPU stand out from other builds.

Exclusive LED Strip Design

Controlled by the patented TT RGB PLUS Software and the app, the built-in 12 addressable LEDs feature great light coverage.

High Water Flow Design

Pacific V-RTX 3080/3090 covers all GPU's heat source, ensuring stable and reliable cooling performance even during overclocking. The waterblock also covers the entire PCB so no components are exposed, limiting the possible damage while handling the GPU.

Mirror-Finished CU Base

Pacific V-RTX 3080/3090 Plus (ASUS ROG) GPU Waterblock has a copper base with a mirror finished anti-corrosive nickel plating, which is easier for users to spread out the thermal compound and provides exceptional heat transfer while keeping the water block looking as good as new.

High Quality Aluminum Backplate

The aluminum backplate can cover the entire GPU from the back, preventing the PCB board from being twisted or bent.

Unique Micro-Channel Structure

Featuring a compact form factor with 0.5mm micro-channel fin construction guarantees optimal clearance and extreme heat dissipation.

Tt LCS Certified

Thermaltake exclusive certification applied only to products that pass the design and hardcore enthusiast standards that a true LCS chassis should hold to.

TT RGB PLUS

TT RGB PLUS Ecosystem is the intelligent lighting system for PCs that combines the most advanced addressable LED lighting with Thermaltake's patented TT RGB PLUS Software.

AI Voice Control

TT AI Voice Control App enables users to control light switch, color and fan speed by talking to mobile devices.

TOUGHLIQUID 240 ARGB Sync AIO Cooler is a TOUGHFAN 12 equipped all-in-one liquid cooler with a built-in controller and rotational cap with 6 LEDs, which can be controlled by 5V RGB compatible motherboards.

TOUGHLIQUID 240 ARGB Sync

TOUGHLIQUID 240 ARGB Sync is an all-in-one liquid cooler that supports 5V RGB compatible motherboards, allowing users to control lighting effects with their motherboard's software.

• Aura Addressable Header
• Digital Pin Header
• JRAINBOW Header
• Addressable RGB LED Header

Rotational Cap

TOUGHLIQUID 240 ARGB features a rotational cap that allows users to rotate the cap easily even after installation, so the TT logo faces the right direction to present the overall aesthetic of the build.

Switch Lighting Effects

The mirror-finished water block is designed with a built-in controller, which grants easy control of the water block's lighting mode, speed, and color, creating effortless cable management while enjoying the lighting effects with direct access.

TOUGHFAN 12 Equipped

Equipped with two TOUGHFAN 12, the TOUGHLIQUID 240 ARGB Sync now provides a fan speed of up to 2000 RPM, ensuring best cooling results.

High Performance Waterblock

The high performance copper base plate accelerates heat conductivity. The high quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore no refill is required.

Universal Compatibility

TOUGHLIQUID 240 ARGB Sync All-In-One Water block supports Intel and AMD universal brackets, allowing different CPU users to enjoy fantastic lighting effects after a quick installation.

Intel : LGA 2066/2011-3/2011/1366/1200/1156/1155/1151/1150
AMD : AM4/AM3+/AM3/AM2+/AM2/FM2/FM1

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.

TOUGHLIQUID 360 ARGB Sync AIO Cooler is a TOUGHFAN 12 equipped all-in-one liquid cooler with a rotational cap that has 6 LEDs, which can be controlled by both built-in controller and 5V RGB compatible motherboards.

TOUGHLIQUID 360 ARGB Sync

TOUGHLIQUID 360 ARGB Sync is an all-in-one liquid cooler that supports 5V RGB compatible motherboards, allowing users to control lighting effects with their motherboard's software.

Switch Lighting Effects

The mirror-finished water block is designed with a built-in controller, which grants easy control of the water block's lighting mode, speed, and color, creating effortless cable management while enjoying the lighting effects with direct access.

High Performance Waterblock

The high performance copper base plate accelerates heat conductivity. The high quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore no refill is required.

Universal Compatibility

TOUGHLIQUID 360 ARGB Sync All-In-One Water block supports Intel and AMD universal brackets, allowing different CPU users to enjoy fantastic lighting effects after a quick installation.