PC Fans/Heat Sinks
-
Arctic Cooling P14 PWM PST A-RGB Cooling Fan - 1 Pack - 5.51" Maximum Fan Diameter - 1 x Fan(s) - 515.4 gal/min Maximum Airflow - 1900 rpm - Fluid Dynamic Bearing - 4-Pin Connector + 4-Pin Socket, 3-Pin 5 V-DI-GND Connector - ARGB LED - Black - 1 - Mother
Addressable RGB for Full Colour Control
The P14 PWM PST A-RGB has 12 digital A-RGB LEDs in the center fan wheel. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.
0 dB Mode - Zero rpm
The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.
Maximum Smoothness, Minimum Vibration
The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P14 PWM PST A-RGB has rubberised contact surfaces and thus reduces audible vibrations to a minimum.
Optimised for High Static Pressure
The P14 PWM PST A-RGB operates with a focused airflow and a high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.
200 to 1900 rpm Controlled via PWM PST
With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P14 PWM PST A-RGB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance.
High Quality Bearing
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended.
Quality You Can Rely On
To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the P14 PWN PST A-RGB.
Learn More -
Arctic F12 Cooling Fan - 4.72" Maximum Fan Diameter - 5 x Fan(s) - 396.5 gal/min Maximum Airflow - 1350 rpm - Fluid Dynamic Bearing - 3-Pin - Black, White - Case
Maximum Quietness, Minimum Vibration
Even at low speeds, the operating sound of the new ARCTIC motor is barely noticeable. Due to sinus-magnetizing the new motor only creates about 5 % of the vibration from the commutation of a regular DC motor without a filter.
Innovative Design Enables Quiet and Efficient Ventilation
The innovative design of the fan blades improves the airflow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimising the noise level yet delivering the desired airflow and pressure.
Long Service Life
The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.
Two Way Installation
- Blow warm air out of the case
- Draw cool air into your case
Quality You Can Rely On
To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how to improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality but also durability. It's a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the F12.
Learn More -
Arctic F12 PWM PST Cooling Fan - 5 Pack - 4.72" Maximum Fan Diameter - 5 x Fan(s) - 396.5 gal/min Maximum Airflow - 1350 rpm - Fluid Dynamic Bearing - 4-Pin Connector, 4-Pin Socket - Black - 5 - Case, Computer, CPU
Maximum Quietness, Minimum Vibration
Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter.
Perfect Case Fan Regulation with PWM
The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level.
PWM Sharing Technology (PST) Lowers Noise
If you want to improve the cooling efficiency of your computer you get several case fans working in parallel (since it takes ten fans to double the noise level). But what does it help if they don't work together? The PST assures that all of your fans listen to one control signal. E.g. you share the CPU Cooler's PWM signal and assure that your case fans stand down at low load and spin up whenever necessary.
Innovative Design Enables Quiet and Efficient Ventilation
The innovative design of the fan blades improves the airflow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimising the noise level yet delivering the desired airflow and pressure.
Two Way Installation
- Blow warm air out of the case
- Draw cool air into your case
Long Service Life
The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.
Quality You Can Rely On
To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how to improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality but also durability. It's a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the F12 PWM PST.
Learn More -
Arctic Cooling P14 PWM PST A-RGB Cooling Fan - 3 Pack - 5.51" Maximum Fan Diameter - 3 x Fan(s) - 515.4 gal/min Maximum Airflow - 1900 rpm - Fluid Dynamic Bearing - 4-Pin Connector + 4-Pin Socket, 3-Pin 5 V-DI-GND Connector - ARGB LED - Black - 3 - Mother
Addressable RGB for Full Colour Control
The P14 PWM PST A-RGB has 12 digital A-RGB LEDs in the center fan wheel. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.
0 dB Mode - Zero rpm
The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.
Maximum Smoothness, Minimum Vibration
The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P14 PWM PST A-RGB has rubberised contact surfaces and thus reduces audible vibrations to a minimum.
Optimised for High Static Pressure
The P14 PWM PST A-RGB operates with a focused airflow and a high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.
200 to 1900 rpm Controlled via PWM PST
With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P14 PWM PST A-RGB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance.
High Quality Bearing
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended.
Quality You Can Rely On
To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the P14 PWN PST A-RGB.
Learn More -
Arctic Freezer 34 eSports DUO Cooling Fan/Heatsink - 4.72" Maximum Fan Diameter - 2 x Fan(s) - 2100 rpm - Air Cooler - Fluid Dynamic Bearing - 4-Pin - Compatible Intel Socket: R4 LGA-2066, LGA 2011-v3, H2 LGA-1155, H4 LGA-1151, H3 LGA-1150, LGA-1200 - Com
EXCELLENT PRICE-PERFORMANCE RATIO
With two powerful, pressure-optimised BioniX P-fans and its updated, thermal-coated heatsink, the Freezer 34 eSports DUO offers a lot of performance for a fair price. In internal tests levelled to 28 dB(A), the Freezer 34 eSports DUO was able to surpass many competitors, even much bigger and more expensive double tower cooling solutions.
NEW P-FANS FOR INCREASED PERFORMANCE
The Freezer 34 eSports DUO benefits of all advantages of our new BioniX P-fans.
- High static pressure for increased cooling performance
- Extended RPM range
- Lower power consumption
- Fewer vibrations
- Extended life span
- High quality bearing
- PWM PST for synchronous fan control
-
Arctic Cooling Freezer Cooling Fan/Heatsink - 4.72" Maximum Fan Diameter - 2 x Fan(s) - 2100 rpm - Fluid Dynamic Bearing - Compatible Intel Socket: H2 LGA-1155, H LGA-1156, H3 LGA-1150, R4 LGA-2066, H4 LGA-1151, LGA 2011-v3 - Compatible AMD Socket: AM4 -
- Compatible with Intel ® & AMD ® sockets
- Thermal coating and evenly spread heat pipes for optimal heat dissipation
- Push-Pull-Configuration for ideal airflow
- Broad RPM Range for highest performance and low noise level
- Focused airstream for improved cooling performance
- 0 dB mode: silent passive mode when PWM signal is below 5 %
- PWM Sharing Technology (PST) regulates fan speed synchronously
- Extended life span and less vibrations with new motor technology
- Secure hold with backplate
- MX-4 thermal paste included
Excellent Price-Performance Ratio
With two powerful, pressure-optimised BioniX P-fans and its updated, thermal- coated heatsink, the Freezer 34 eSports DUO offers a lot of performance for a fair price. In internal tests levelled to 28 db(A), the Freezer 34 eSports DUO was able to surpass many competitors, even much bigger and more expensive double tower cooling colustions. More information about our performance test and the max. CPU temperatures for AMD & Intel can be found in our Cooler FAQ.
New P-fans for Increased Performance
The Freezer 34 eSports benefits of all advantages of our new BioniX P-fan.- High static pressure for increased cooling performance
- 0 db fan mode below 5 % PWM
- Extended RPM range
- Lower power consumption
- Less vibrations
- Extended life span
- High quality bearing
- PWM PST for synchronous fan control
Evenly spread direct-touch heat pipes and an optimised heat sink design with 54 cooling fins lead to an ideal heat dissipation for the Freezer 34 eSports.
Ideal airflow
The two BioniX P-fans of the Freezer 34 eSports DUO work in push-pull-mode. The resulting increase of airflow ensures that more cold air is transported into the heatsink for cooling and the heat from the CPU is dissipated even faster from the heat sink. This ensures the best possible performance of the CPU.
Easy Installation & Secure Hold
Fast and easy to install and extremely reliable, the Freezer 34 eSports mounting system is compatible with Intel and AMD sockets. Thanks to a backplate and its low weight, the Freezer 34 eSports not only fool-proof to install, but also absolutely transport safe.
High Performance for High-End CPU
The contact surface of the Freezer 34 eSports heat pipes does not cover the full heatspreader, but, more importantly, is right where the processor DIE is and covers even the largest versions (18 core) completely.
MX-4 Thermal Paste included
The high-performance MX-4 thermal compound is included and ensures the best cooling results.
Thermal Coating
A thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation and to an increased cooling performance.
Learn More










