Connector Adapters

The VisionTek DVI to DisplayPort 1.5 meter (5 foot) cable lets you connect your legacy DVI laptop, desktop or dock to the latest DisplayPort monitors with one simple cable. Most other adapters on the market require multiple adapters, then an additional display cable. This solution provides an all in one solution without the need for additional power or adapters.
With the 1.5 meter (5 foot) length, the DVI-D to DisplayPort cable provides ample length so you can configure your desk or presentation setup however you wish.

VisionTek Display cables offer a quick solution for your display needs. Our cables work across all operating systems including OS X, Linux and Windows XP, Windows 7, Windows 8, and Windows 10. Where necessary, our cables are active for expanded compatibility with multi monitor displays, docks, and digital signage. AMD Eyefinity is also supported with our cables. Each VisionTek cable has been extensively tested with HP, Dell, Lenovo and Mac systems to ensure a wide range of system compatibility.

Key Features

• Supports resolutions up to 1440p WQXGA (2560 x 1440 @ 60Hz).
• Connect your DVI-D device to a DisplayPort display, TV or
• projector.
• Supports DVI-D digital signal only. DVI-I analog signal is not
• supported.
• Supports AMD Eyefinity Multi-display technology.
• No O/S driver required.
• Plug 'n Play with no power input requirement.
• One Year Warranty.

The VisionTek mini DisplayPort Male to DisplayPort Female Adapter features a mini DP male connector on one end and a DP female connector on the other. The adapter allows you to connect any mini DisplayPort-equipped laptop or graphics card to a standard DisplayPort connection such as an HDTV, monitor or projector. DisplayPort cable not included.

VisionTek's mini DisplayPort Male to DisplayPort Female Adapter supports high resolutions of up to 4K (4096 x 2160) @ 60Hz. Resolutions supported with this mDP to DP adapter will depend on host system. The adapter also supports Multi-Stream (MST) for daisy-chaining multiple monitors, as well as provides optional audio support and digitally protected content (HDCP and DPCP) for host systems that support these features.

NOTE: This adapter is not bi-directional. This adapter converts
mini DisplayPort to DisplayPort only, not vice-versa.

VisionTek Display adapters offer a quick solution for your display needs. Our adapters work across all operating systems including OS X, Linux and Windows XP, Windows 7, Windows 8, and Windows 10. Where necessary, our adapters are active for expanded compatibility with multi monitor displays, docks, and digital signage. AMD Eyefinity is also supported with our adapters. Each VisionTek adapter has been extensively tested with HP, Dell, Lenovo and Mac systems to ensure a wide range of system compatibility.

Key Features

• Supports resolutions up to 4K UHD (4096 x 2160 @ 60Hz).
• Connect your mDP device to a DisplayPort display, TV or projector.
• Supports AMD Eyefinity Multi-Display capability.
• No O/S driver required.
• Plug 'n Play with no power input requirement.
• One Year Warranty.

The VisionTek DisplayPort to HDMI 2.0 active adapter allows you to connect your favorite DP device to your HDMI display or projector. An HDMI cable (sold separately) is required for this DisplayPort to HDMI adapter. The DisplayPort to HDMI adapter transmits high-definition audio and video from your DP device to an HDTV, display or monitor with HDMI for video streaming or gaming. The DisplayPort to HDMI adapter connects and configures displays in Extended Desktop or Mirrored Displays configurations.

Unlike passive adapters, this DP to HDMI converter offers an active chipset for compatibility with any DisplayPort output - ideal for graphics cards and devices that do not support outputting multi-mode DP++ signals (e.g. AMD Eyefinity).

NOTE: This adapter is not bi-directional. This adapter convertsDisplayPort to HDMI only, not vice-versa.

VisionTek Display adapters offer a quick solution for your display needs. Our adapters work across all operating systems including OS X, Linux and Windows XP, Windows 7, Windows 8, and Windows 10. Where necessary, our adapters are active for expanded compatibility with multi monitor displays, docks, and digital signage. AMD Eyefinity is also supported with our adapters. Each VisionTek adapter has been extensively tested with HP, Dell, Lenovo and Mac systems to ensure a wide range of system compatibility.

Key Features

• Supports resolutions up to 4K UHD (3840 x 2160 @ 60Hz).
• Fully HDMI 2.0 compatible.
• Fully DisplayPort 1.2 compatible (earlier version compatibility).
• Connect your DP device to an HDMI display, TV or projector. (Not reversible, only supports DP to HDMI)
• Active chipset for expanded capability.
• Supports AMD Eyefinity Multi-Display capability.
• No O/S driver required.
• Plug 'n Play with no power input requirement.
• One Year Warranty.

With the VisionTek USB-C to USB-A adapter, you can quickly connect your USB Type-A devices to most laptops, tablets and smartphones with a USB Type-C or Thunderbolt 3 port. While most laptops have USB-C ports, most thumb drives, mice, keyboards and peripherals use a standard USB-A port. This small adapter allows for quick connectivity without having to use a large dock or port replicator.
This convenient adapter is ideal for your system at home, work or on the go. Lightweight, metal design is perfect for on the go lifestyles and includes a one year warranty.

Compatible systems include USB-C or Thunderbolt 3 equipped MacBook Pro 2019/2018/2017, MacBook Air 2018, Dell, Lenovo, or HP laptop.
Plug the USB-C end of the adapter into a USB-C port, and then connect your flash drive or other standard USB-A device. You can sync or charge your phone with this USB-C to USB adapter. Data transfer speed is at the standard of USB 3.0 5Gb/s.

Key Features

• 1 Inch USB-C to USB-A 3.0 with Male Type-C and Female Type-A
• Charge & Sync
• USB 3.0, 5 Gbps SuperSpeed
• One Year Warranty.

With the VisionTek USB-C to USB-A adapter, you can quickly connect your USB Type-A devices to most laptops, tablets and smartphones with a USB Type-C or Thunderbolt 3 port. While most laptops have USB-C ports, most thumb drives, mice, keyboards and peripherals use a standard USB-A port. These small adapters allow for quick connectivity without having to use a large dock or port replicator.
Convenient 3-Pack for your system at home, work or on the go. Lightweight, metal design is perfect for on the go lifestyles and includes a one year warranty.

Compatible systems include USB-C or Thunderbolt 3 equipped MacBook Pro 2019/2018/2017, MacBook Air 2018, Dell, Lenovo, or HP laptop.
Plug the USB-C end of the adapter into a USB-C port, and then connect your flash drive or other standard USB-A device. You can sync or charge your phone with this USB-C to USB adapter. Data transfer speed is at the standard of USB 3.0 5Gb/s.

Key Features

• 1 Inch USB-C to USB-A 3.0 with Male Type-C and Female Type-A
• Charge & Sync
• USB 3.0, 5 Gbps SuperSpeed
• One Year Warranty.