Cable Extenders

eBridge100RMT Ethernet over Coax/CAT5e Adapter Kits transmit full duplex data at 100Mbps and pass PoE compliant power over coax 304m, or CAT5e cable up to 500m without repeaters. The adapter kit consists of an eBridge100RM receiver and an eBridge100TM transceiver. These adapters, along with the connected IP camera or edge device, is powered by virtually any midspan or endspan. Remote management functions such as edge device reset, monitoring real-time current draw and port status are possible when coupled with an Altronix NetWay8M/16M Midspan. eBridge100RMT is compatible with Megapixel, HD720, HD1080 and VGA cameras.

10/100/1000T over VDSL2 Mini Media and Rate Converters

Multi-Tenant Units (MTUs) such as offices and campuses, and Multiple Dwelling Units (MDUs) such as hotels and apartments are the ideal environments for MMC600x network extenders. Legacy wiring, such as Coax or phone grade RJ-11, can be used to provide broadband access to Internet services, including video streaming, gaming and e-mail.

Extended Ethernet Operation

Used in pairs, Allied Telesis MMC6000 Series media converters provide up to 150Mbps (MMC6005) or 300Mbps (MMC6006) total bandwidth over legacy wiring at distances up to 3km.

Standard Ethernet operation is preserved end-to-end, retaining VLAN tags and Ethernet MAC information across the link, while higher layer protocols are passed transparently

MTU and MDU Applications

Multi-Tenant Units (MTUs) such as offices and campuses, and Multiple Dwelling Units (MDUs) such as hotels and apartments are ideal for MMC6000 Series network extenders. Legacy wiring, such as Coax or phone grade RJ-11, can be used to provide broadband access to Internet services, including video streaming, gaming and e-mail.

There is no need to rewire premises with expensive cabling to provide broadband Ethernet services.

Standalone and Rack-Mount

The Allied Telesis MMC6000 Series is available as a compact, standalone unit for installation at the central office, or can be rack-mounted in a standard Allied Telesis MMCR18 chassis. The MMCR18 is capable of housing up to eighteen units in one compact chassis, and features a redundant power supply to simplify wiring and minimize space requirements.

Plug and Play Operation

Simply connect to the RJ-45 Ethernet port and the unit will automatically auto-sense and configure for 10/100/1000T, as well as full- or halfduplex Ethernet operation.

The EKI-1751I is an Industrial Long Reach Ethernet Extenders to utilize existing copper cabling infrastructure (twisted pair or coaxial cable) extending Ethernet to up to 2000 meters over VDSL2. The EKI-1751I adds M12 Ethernet connector in addition to 2 RJ45 Ethernet connectors to offer the most flexibility possible to your project needs. M12 connector adds the option to deploy these easy to use plug-n-play devices into a more secure environments where reliability is the utmost priority.

The EKI-1751I is recommended to be used in pairs over a single pair of telephone-grade unshielded twisted pair (UTP) wire or a coaxial cable. EKI-1751I uses IP30 aluminum enclosures, ideal for industrial applications capable of handling wide range of temperatures -40 to +75 °C. A convenient DIP switch, provides easier configurations option to meet many deployment needs. Installer can select, VDSL2 'Band-Plans' (Asymmetric or Symmetric), SNR margin (6dB or 9dB). Abundant LEDs, offer quick snapshot of status and diagnostics.

The EKI-1751-AE is a Long Reach Ethernet Extender to utilize existing copper cabling infrastructure (twisted pair), extending Ethernet to up to 1200 meters over VDSL2. Applications such as IP-based Internet connections, video surveillance and voice services can benefit from the EKI-1751-AE series. The devices support VDSL2 Profiles 17a and 30a.

EKI-1751-AE is designed to work in pairs, over twisted pair; as an unmanaged product, it is easy to install and each Extender can be set to a Master (CO) or Remote (CPE) via a DIP Switch. Offering one model that can be set to a Master or Remote and operate as a pair reduces the cost of investment and minimizes inventory as well.

The Extenders support SNR Margin, VDSL2 Profile 30a(High Bandwidth Mode) or VDSL2 Profile 17a(Long Reach Mode), and Symmetric/Asymmetric data throughput, all DIP Switch- selectable. The selection of symmetrical or asymmetrical for throughput of upstream/downstream data rates directly influences the distance covered. LEDs include link activity, VDSL status, and Central Office or Customer Premises Equipment designation.

The Extenders meet 802.3 Ethernet standards, as well as transparently supporting VLANS, 802.1q.

This is designed to extend Ethernet data transmitting/receiving while providing power to your Power Device (PD, such as IP Camera or Wireless Range Extender) via PoE (Power over Ethernet) standard without external power adaptors. It can detect if the device connected to it complies with PoE and PoE+ standards automatically, or you can turn the PoE function ON/OFF manually via a switch located on the outer casing. It supports 10/100/1000M transmitting rate, and can extend both data transmitting/receiving and power up to 100M (328ft).