Cable Extenders

USB 3 Extenders enable you to extend USB 3.1 beyond the standard 3m cable limit for USB 3.1 peripheral devices (like a camera or other AV source). This extender system is composed of two individual units, the Local Extender, and the Remote Extender, and has the following features:

-Up to 328ft of extension when directly connected over Cat6a/7 cable

-USB 3.1 Gen 1 data rate up to 5Gbps

-Supports up to four remote USB devices simultaneously at full bandwidth

-True plug and play, no software drivers required

-Works with all major operating systems

-100/10000 ethernet channel

This package includes:

-USB 2 local extender unit

-USB 3 remote extender unit

-Local extender 24V, 1A power supply with AC cord set

-Remote extender 24V, 2.71A power supply with AC cord set

-6ft USB 3.1 cable

Learn More

Vaddio USB Extender - USB Learn More

One component of a complete solution that, when paired with a receiver conquers USB length limits. This USB Keystone Extender extends the signal of a USB device to a host computer up to 150 feet, enabling you to place your USB projector, interactive white board, camera, printer, web cam, hub or other USB device exactly where you want it.

Learn More

One component of a complete solution that, when paired with a receiver (sold separately), conquers USB length limits. This solution extends the signal of a USB device to a host computer up to 150 feet, enabling you to place your USB projector, camera, printer, web cam, hub or other USB device exactly where you want it. Our USB superbooster dongle is powerful yet simple, with no drivers to install or special software required. It's also compatible with any computer that supports USB.

The complete solution is connected via a standard Cat5, Cat5E, or Cat6 UTP cable (not included) that provides easy installation. Use pre-terminated network cables, or pull unterminated cable and use the included toolless IDC RJ45 connector to terminate your own cable. Because the USB superbooster dongle is bus-powered, no external power source is required. Compliant with USB specification 1.1.

Input: One USB Type A Male
Output: One RJ45 Female

Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation.

Learn More

One of the only solutions on the market designed and engineered for compatibility with 300 series and 500 series Promethean, SMART®, and other interactive whiteboard (IWB) models, the new USB 1.1 Superbooster Extender for Interactive Whiteboards is perfect for extending 1.1 signals up to 40m (131ft) to support any interactive whiteboard. Other USB extension solutions use a chipset that is incompatible with interactive whiteboards which can cause dropped signals and/or periodic spikes when the solutions are used together. Our Superbooster allows USB length limitations to be conquered and the interactive whiteboard to be installed in the best location. The booster is powerful yet simple, with no drivers to install or special software required, so it's compatible with any computer that supports USB.

This plug-and-play device consists of a transmitter unit and a remote unit connected together by a standard Cat5, Cat5E, or Cat6 network cable (not included). Simply connect a USB cable from the IWB to the receiver; connect a Cat5 cable from the receiver to the transmitter, then connect the transmitter to an available USB port on the computer and the system is up and running. Bus-powered, it requires no external power source. Instead, the Superbooster has internal DC power conditioning circuits to maintain the proper voltage to the remote device so no external power is required for either the base or remote units. Compliant with USB Specification 1.1.

Please Note: The power demands of IWB models may require the use of external power for proper operation. Please consult with your device manual or manufacturer for details. During installation, do not connect the transmitter to the PC until all other connections in the system have been made. The other connections in this system would include the Cat5e/6 cable between the transmitter and receiver and the USB connection between the IWB and receiver.

Learn More