Hardware Connectivity

• Extends Ethernet and PoE connections up to 1000m (3280 ft)
• Supports IEEE 802.3af, IEEE 802.3at compliant devices
• NEMA TS2 Compatible
• Cost efficient solution

AXIS Long range PoE Extender kit offers a smart and easy-to-install solution for extending the range of your network and PoE. Without being restricted by the 100m (328ft.) limit for Ethernet cables, Axis network products can be installed at greater distances. Simply connect AXIS Long range PoE Extender kit in-line with the CAT5e or CAT6 cable and power and data are forwarded to your Axis network devices. AXIS Long range PoE Extender kit supports both IEEE 802.3af and IEEE 802.3at compliant devices. With its rugged design, AXIS Long range PoE Extender kit withstands harsh environmental conditions and challenging temperatures.

Going the distance

By using a single AXIS Long range PoE Extender kit, a connection can be achieved between 200-1000 meters (656-3280 ft.). The product automatically configures for link speed, duplex and crossover. Range depends on cable type used, the desired data rate and power required, find out more here. AXIS Long range PoE Extender kit can be powered from conventional IEEE 802.3af or IEEE 802.3at midspans and switches or AXIS T8003 PS57 for maximum range and power.

Cost efficient and easy to install

Save time and cost in installation. With AXIS Long range PoE Extender kit there is no need to lay expensive fiber optics, or allocate additional infrastructure and hardware in the middle, like media converters or switches. Plug and play, AXIS Long Range PoE Extender kit self-configures for the best performance. No set-up or configuration is needed. The diagnostic LEDs indicates power level of installation and if there are errors, improving quick diagnostics of the installation.

Learn More

• Small form factor
• Easy to assemble
• For CAT6a (AWG 26-22)
• MPTL compliant
• Suitable for PoE

RJ45 Field Connector is easy to assemble and thanks to its compact size, it's ideal for terminating CAT6a cables directly in a wide range of Axis network devices. The connector is compliant with the latest standard ANSI/TIA-568.2-D, which allows MPTL-installations (modular plug terminated link). It's suitable for IEEE 802.3af, 802.3at, 802.3bt and Axis High PoE solutions. The connector is sold in packages of 10.

Learn More

• Carries PoE and PoE+ over the Coax cable
• Reliable configuration
• One channel

Full-rate network connection

AXIS T8640 PoE+ over Coax Adapter Kit comprises AXIS T8641 PoE+ over Coax Base Unit and AXIS T8642 PoE+ over Coax Device Unit. It can also be used in those installations that require PoE transmissions over 100 m (328 ft). A full-rate network connection is delivered over maximum cable ranges of 500 m, which far exceed most recommended distances for analog video installation. An optional power supply can be used if PoE is not available, or if higher power for the network camera is needed. Please check the Setup-tab or Range-tab below for more information.

Range

Range figures assume short (< 5 m or 16 ft) Cat-5e cables between equipment.

Learn More

Male M12 4p Connector is robust and IP67-rated. It is field-installable with screw-in contacts.

The connector is only compatible with AXIS P39 M12 models.

Learn More

AXIS 5502-491 Multi-Connector Cable Adapter - 16.40 ft Data Transfer Cable for Network Camera - Black Learn More