Accessories

The ION™ Platform consists of a 19-slot, a 2-slot, and a 1-slot chassis, along with a variety of slide-in media converter modules. The high density 19-slot chassis is designed for core network and datacenter applications where there is a need for high volume and centralized points of media conversion. While at the network edge, the 1-slot and 2-slot ION™ chassis' are designed to allow a single card, two cards, or one double-wide card to be deployed as a stand-alone media converter.

The ION219-x is an all new intelligent, high-density, multi-protocol system supporting a variety of network interface devices . Designed for both carrier class and enterprise network applications where multiple points of fiber integration and secure network management of the fiber interface devices is essential. An end-to-end fiber integration solution can be achieve by pairing the modules in a high density ION chassis with the modules in another ION chassis, an ION stand-alone, or a Transition Networks' Point System™ stand-alone device. To take full advantage of all the features and functions available with the ION Chassis, an ION Management Module is required. The ION Management Module connects to the chassis backplane and communicates with the individual cards in the ION Chassis. Each slide-in-module for the ION Chassis has specific features and functions that are controlled via the ION Management Module. A network administrator can configure, monitor and troubleshoot ION slide-in-modules remotely via the ION Management Module.

Transition Networks understands that no network is managed in the same manner and that different security levels and management interfaces are often required depending on the deployment of the ION Chassis. With that in mind, the ION Platform has been designed to be one of the most versatile and secure fiber intergration systems available today.

Many PCs will already have the necessary cabling and connection needed for the N-GXE-POE-xx-01 PoE NIC. However, for some configurations, the PoE NIC needs an additional power source connection at the ATX port. Transition Networks offers optional cable accessories in case the power source connection is not already available. The N-POE-CBLKIT provides all three cable options and is typically used for pre-sales proof of concept. After evaluation, the specific cable required can be ordered individually.

Outdoor Switch Enclosure Pole Mount Bracket Kit for 2-6" diameter pole (optional)