Accessories
-
Transition Networks 12-Slot Media Converter Rack - 12 x Total Number of Module Slots - 1 x Number of Power Supplies Supported - 1 x Number of Power Supplies Installed - 12 Slot
Flexible Design for growing networks simplify your installation of Transition Networks' stand-alone media converters with the Media Converter Rack. This 19" rack-mountable unit supports up to twelve media converters while the unique design allows for multiple connections, consolidated into a single device, making network connections easier and more efficient.
- Space Saving Design: This device is powered by a single internal universal power supply; eliminating the need for the multiple power connections often associated with multiple converter installations. The unit saves space in the wiring closet by providing a means for mounting (12) converters in (3) units of rack space while reducing the number of wall outlet power connections required.
- Convenience: The media converters are hot-swappable. They can also be removed from the rack, powered externally, and used as stand- alone units in new applications as your network needs change in the future.
- Cost Effective: Easily rack mount the single-wide, 12 volt powered, Transition Networks' media converters that you already own, or buy stand-alone units today and rack mount them in the future.
- Includes: (12) Universal rack mount media converter brackets.
$394.99 -
Transition Networks E-MCR-05 12-slot Media Converter Rack
Simplify your installation of Transition Networks' standalone media converters with the Media Converter Rack. This 19" rack-mountable unit supports up to twelve media converters while the unique design allows for multiple connections, consolidated into a single device, making network connections easier and more efficient.
Learn More$397.28 -
Transition Networks 1-Slot Chassis for ION Modules - 1 Slot - Desktop, Wall Mount, DIN Rail
The ION001-A is a 1-slot ION chassis that is design for network edge deployments, allowing a single ION card to be deployed as a stand-alone unit. This chassis provides a method of mounting one single-wide ION slide-in media converter module and includes an external AC power supply.
Learn More -
Transition Networks ION001-A 1 Slot Media Converter Chassis
Transition Networks understands that no network is managed in the same manner and that different security levels and management interfaces are often required depending on the deployment of the ION Chassis. With that in mind, the ION Platform has been designed to be one of the most versatile and secure fiber intergration systems available today.
Learn More -
Transition Networks Rack Mount for Network Equipment
Transition Networks Rack Mount for Network Equipment Learn More -
Transition Networks Ethernet Over 2-Wire Extender With PoE+ - 2 x Network (RJ-45) - 6800 ft Extended Range
Transition Networks Ethernet Over 2-Wire Extender With PoE+ provides the ability to quickly and easily upgrade Ethernet networks with modern PoE powered IP devices without the need to replace the existing copper wire infrastructure. The extenders leverage existing 18-24 AWG unshielded twisted pair (CAT 5, CAT 3 and other 2-wire phone wire) cabling infrastructure to extend the Ethernet network at near Gigabit speeds and provide data and power to IP devices in remote locations, saving time and money over installing new cable.
The Ethernet Over 2-Wire Extenders With PoE+ are used in pairs, with a local or remote device at opposite ends of the copper link. The extenders provide flexibility for either copper or fiber Ethernet connections. The Local device offers a 10/100/1000Base-T RJ-45 and 100/1000Base-X open SFP combo port and a RJ-45 or 2-wire terminal block connection to provide safety extra low voltage (SELV) power over 2-wire to the Remote device. The Remote device receives power through the RJ-45 or 2-wire terminal block connection and provides a 10/100/1000Base-T RJ-45 output with PoE+ power or a 100/1000Base-X open SFP combo port connection for IP cameras, wireless access points or other PoE powered end devices.
Power for the Local device can be supplied through a properly isolated +48VDC power source or through the designated 90 Watt power adapter. Power for the Remote device can be supplied with PoE from the Local unit, through a properly isolated +48VDC power source, or through the designated power adapter for providing redundant power or for additional power requirements at the Remote device.
The Ethernet Over 2-Wire Extenders With PoE+ are supplied with a web GUI, which allows password-protected access to various configuration options of both the Local and Remote devices through a single IP address. It also allows easy upgrades to firmware.
Learn More$410.38
