Accessories

Tool-less rack rails can be installed into racks with square holes. Rackmount equipment weighing up to 200 lbs (90.7 kgs) can be installed using a tool-less rack rail. The rack rail is 27.87" (708 mm) deep and can be installed into server racks with installation depths from 28 - 30" (711 - 762 mm) and supports equipment up to 35" (889 mm). The tool-less rack rail is primarily for 4Post racks, but it can be installed in other 2Post configurations as well with the addition of 2Post conversion kits. Center mount installations require 2POST-2UKIT and flush mount installations require 4UKIT-003

Our rack mount bracket is a perfect solution for small or home offices. In environments where a server rack is too much or there's just not enough room, this wall mount can flush mount your 19" equipment vertically to the wall or horizontally to the bottom of a desk. With up to a 200lb load capacity, can handle everything from switches and patch panels to heavy servers. Any equipment mounted horizontally must be attached with two brackets so that there are four areas of support. This vertical wall mount rack works with standard 19" server, networking, and telecommunications equipment from Dell, HP, IBM, Apple, Sun, Intel, Cisco, Juniper, 3Com and more.

More from the Manufacturer

RackSolutions 3U 2 Post Relay Rack Shelf has depth of 29 inches (737 mm) and a 300 pound (136 kgs) weight capacity, making it a perfect for solution for mounting large heavy networking IT equipment in a 2Post rack. The shelf features slots along its side used for securing equipment using our equipment straps. Options with flanges, also called equipment stops, facing either up or down to fit a wider variety of needs. Both vented and solid options are available to assist with airflow. Our 2 Post shelves are compatible with most standard EIA 19" 2 post telco and relay racks.

RackSolutions 3U 2 Post Relay Rack Shelf has depth of 29 inches (737 mm) and a 300 pound (136 kgs) weight capacity, making it a perfect for solution for mounting large heavy networking IT equipment in a 2Post rack. The shelf features slots along its side used for securing equipment using our equipment straps. Options with flanges, also called equipment stops, facing either up or down to fit a wider variety of needs. Both vented and solid options are available to assist with airflow. Our 2 Post shelves are compatible with most standard EIA 19" 2 post telco and relay racks.

RackSolutions 3U 2 Post Relay Rack Shelf has depth of 29 inches (737 mm) and a 300 pound (136 kgs) weight capacity, making it a perfect for solution for mounting large heavy networking IT equipment in a 2Post rack. The shelf features slots along its side used for securing equipment using our equipment straps. Options with flanges, also called equipment stops, facing either up or down to fit a wider variety of needs. Both vented and solid options are available to assist with airflow. Our 2 Post shelves are compatible with most standard EIA 19" 2 post telco and relay racks.