Accessories

The kit contains AXIS T8415 Wireless Installation Tool, an extra AXIS Installation Tool Battery 12 V 3.4 Ah, AXIS Installation Charger Adaptor 12 V 1 A and a strap. All of which is protected in a convenient bag, AXIS Installation Bag.

• Room for connectivity devices, midspans and service loop
• Protection against impacts, water, dust and corrosion
• Pre-mounted Ethernet cable with IP66 RJ45 connector
• Re-use existing holes

Roomy compartment for protection and connectivity

AXIS T91G61 Wall Mount is specially designed to accommodate and safely protect against water ingress inside the mount, such as midspans and media converters. The pre-mounted Ethernet cable with IP66 RJ45 connector (with gasket) helps quickly and easily connecting power and data to most of Axis PTZ network cameras.

Beautiful and yet strong

Thanks to its impact-resistant and outdoor proven material, AXIS T91G61 Wall Mount suits all environments, both indoors and outdoors. AXIS T91G61 has the same hole pattern as the standard Axis PTZ wall mount and for retrofit, a pattern that matches Pelco's PTZ camera mount to enable an easy switch - no additional drilling is required. Moreover, it is possible to run the cables externally by using the conduit holes on the base of the wall mount.

AXIS F8211 Pinhole Trim Ring, sold in packs of 10, enables AXIS F1025 Sensor Unit to be recessed mounted and secured on a glass, plastic or metal panel that has a thickness of no more than 2 mm (1/16 in.). The trim ring's diameter is 2.8 cm (1 1/8 in.).

AXIS F8212 Trim Ring, sold in packs of 10, enables AXIS F1005-E/F1035-E Sensor Units and AXIS P1214-E/P1224-E Network Cameras to be recessed mounted and easily secured on a glass, plastic or metal panel. For AXIS F1005-E, the thickness of the panel should not exceed 11.5 mm (7/16 in.). For AXIS F1035-E/P1214-E/P1224-E, the thickness of the panel should not be more than 8.5 mm (5/16 in.). The cover ring's diameter is 4.5 cm (1 3/4 in.).