Accessories

Items 13 to 18 of 39 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Altronix LINQ2 Remote Power Management Adapter

    Altronix LINQ2 network module is designed to interface with eFlow and MaximalF power supply/chargers. It enables power supply status monitoring and control of two (2) eFlow power supply/chargers over a LAN/WAN or USB connection. LINQ2 provides values on demand for AC fault status, DC current and voltage, as well as Battery fault status and reports conditions via SNMP.

    Learn More
    $101.64

  • Altronix MM24 Magnet Mount for Enclosure, Backplane - 26 lb Load Capacity - 24 Pack

    Mounting Magnet accommodates screws and nylon standoff, to mount various boards/accessories in any metal enclosure. 24 pack.

    Learn More
    $61.88

  • Altronix Sixteen (16) port IP and PoE+ Over Extended Distance CAT5e Receiver - Network (RJ-45)

    Pace16PRM is a long range Ethernet receiver that transmits data at 100mbps full duplex and power via CAT5e or higher cable in a PoE(+) compliant format. The Pace16PRM receiver is powered via a PoE midspan, such as the Altronix Netway series, or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at the distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over structured cable. Applications:

    • Extend Network link distance in an industrial environment.
    • Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.

    Learn More
    $2,191.44

  • Altronix Pace1PRD - IP and Hi-PoE over Extended Distance via CAT5e - Network (RJ-45)

    The Pace1PRD is a long range Ethernet receiver. It is powered via a NetWay1D Single Port Hi-PoE Injector. The receiver passes Hi-PoE (60W) over the cable to the eBridge200WPM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over structured cable.

    Learn More
    $144.21

  • Altronix IP and PoE+ over Extended Distance UTP or CAT5e - Network (RJ-45)

    The Pace1PRM is a long range Ethernet receiver. It is powered via a PoE midspan such as the Altronix Netway series or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) or structured cable. Applications:

    • Retrofit digital IP cameras in an analog CCTV CAT5 or UTP installations.
    • Extend Network link distance in an industrial environment over 610m.
    • Works with Megapixel, HD720, HD1080 and VGA (SD) cameras with proper head end equipment.

    Learn More
    $144.55

  • Altronix IP and PoE+ over Extended Distance CAT5e or UTP Solution - 2 x Network (RJ-45) - 1640.42 ft Extended Range

    Pace1PRMT is a long range Ethernet adapter kit which transmits data at 100mbps full duplex and power via a single twisted pair (UTP) or Cat5e or higher cable in a PoE(+) compliant format. The Pace1PRM receiver is powered via a PoE midspan such as the Altronix Netway series or by an endspan. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) or structured cable.

    Applications:

    • Extend Network link distance in an industrial environment over 700m
    • Retrofit digital IP cameras in an analog CCTV CAT5e wired installations.
    • Works with Megapixel, HD720, HD1080 and VGA (SD) cameras.

    Learn More
    $274.18

Items 13 to 18 of 39 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5