Accessories

The CBL-HDMI-FL2 cables deliver HDMI 4K60 resolutions at a data rate of 18 Gbps, are available in 16' and 32' options and have a flat design that remains beautifully hidden under the carpet. With the addition of a MyTurn Source Selection Button which clips into the specially designed groove built into the connector housing, it is easy to instruct the system to switch to the selected input. The MyTurn Source Selection Button communicates to a MyTurn Receiver installed into a Solecis SDX or other AMX control device.

The CBL-DP-FL2 DisplayPort cable delivers HDMI 4K60 resolutions at a data rate of 18 Gbps, and have a flat design that remains beautifully hidden under the carpet. With the addition of a MyTurn ^™ Source Selection Button which clips into the specially designed groove built into the connector housing, it is easy to instruct the system to switch to the selected input. The MyTurn Source Selection Button communicates to a MyTurn Receiver installed into a Solecis SDX or other AMX control device.

The CBL-USB-FL2 USB 3.0 cable is 16 ft with a flat design remains beautifully hidden under the carpet. With the addition of a MyTurn^™ Source Selection Button which clips into the specially designed groove built into the connector housing, it is easy to instruct the system to switch to the selected input. The MyTurn Source Selection Button communicates to a MyTurn Receiver installed into a Solecis SDX or other AMX control device.

The USB Extension Cable is designed to be used with the Acendo Vibe Web Conferencing Sound Bar or the Sereno Video Conferencing Camera to ensure flawless audio and video quality in long cable run applications. There are two versions available, 16 ft. (5m) and 33 ft. (10m), and they can be combined for a maximum of 50 ft. (15m) of additional cable length from the Acendo Vibe/Sereno to the Acendo Core/PC. The USB Extension Cable has a female USB Type A connection on one end, and a male Type A USB connection on the other end. The active circuit built-in to the cable ensures spec-compliant signal integrity at full USB 2.0 bandwidth of 500 Mbps.

The new Enova DGX 800 Enclosure (DGX800-ENC) is a Digital Media Switcher that is ready to support 4K and Ultra High Definition (UHD) content. This robust solution includes a NetLinx^® NX Integrated Controller , redundant power supplies and can be populated with Enova DGX video input and output boards in addition to optional audio -switching boards. There are four connections per video board, and each enclosure holds two video input boards and two video output boards for a maximum matrix of 8x8.

The Enova DGX 800 adds several new capabilities such as automatic setup of DXLink endpoints, single IP addressing for multiple endpoints, and a new web interface to greatly simplify installation and configuration. The new advanced Audio Switching Boards add audio breakaway capabilities and parametric EQ on each DGX output.

The Enova DGX 800 is far beyond a modular media switcher with built-in controller - it functions as the centerpiece of a complete integrated solution that manages and distributes analog and digital audio and video including HDMI/HDCP, control and Ethernet. Easily integrate HDCP into system designs and enjoy hassle-free plug-and-play operation. No tools, no delays and no key constraints - it just works with AMX's exclusive InstaGate Pro^® Technology. Built for today's and tomorrow's needs, a comprehensive set of Enova DGX boards can be used in conjunction with DXLink and DGX Transmitters and Receivers to provide an end-to-end distribution system over twisted pair cable or fiber. An integrated NetLinx NX Controller and embedded Ethernet switch enables management of the entire solution including source equipment and display devices located throughout the environment - all from a single point of control.

In addition to eliminating HDCP delays, InstaGate Pro allows traditionally key limited sources to be switched freely to all connected HDCP compliant displays - eliminating HDCP key limitations that plague large applications. Built-in SmartScale^® Technology on every output provides video that is perfectly scaled for each connected display, eliminating the integration challenges that can occur when sources and displays have different supported resolutions - making it easy to specify, easy to install and easy to use. With the powerful combination of analog-to-digital signal conversion, video scaling and high speed digital switching the system delivers perfect video every time - regardless of signal type.

As part of a complete distribution system, easily send analog or digital audio and video including HDMI with HDCP signals, plus control 10 Km over single mode fiber or 300 meters over multimode fiber; send all this plus power up to 100 meters over standard twisted pair cable to and from the Enova DGX using the DXLink Twisted Pair and Fiber Transmitters/Receivers.